Table of Contents
Advertisement
Quick Links
Washing Machine
OWNER'S MANUAL
F1222ND(1~9)
F1022ND(1~9)
Thank you for buying a
LG Fully Automatic Washing machine.
Please read your owner's manual carefully, it provides
instructions on safe installation, use and maintenance.
Retain it for future reference.
Record the model and serial numbers of your washing
machine.
Advertisement
Table of Contents
Related Manuals for LG F1222ND1
Summary of Contents for LG F1222ND1
- Page 1 OWNER'S MANUAL F1222ND(1~9) F1022ND(1~9) Thank you for buying a LG Fully Automatic Washing machine. Please read your owner's manual carefully, it provides instructions on safe installation, use and maintenance. Retain it for future reference. Record the model and serial numbers of your washing...
-
Page 2: Table Of Contents
roduct Features ■ Protection against creases With the alternate rotation of the drum, creasing in the laundry is minimized. ■ Built-in heater Internal heater automatically heats the water to the best temperature on selected cycles. ■ More economical by Intelligent Wash System Intelligent Wash System detects the amount of load and water temperature, and then determines the optimum water level and washing time to minimize energy and water consumption. -
Page 3: Warnings
arnings READ ALL INSTRUCTIONS AND EXPLANATION OF THE INSTALLATION BEFORE USE For your safety, the information in this manual must be followed to minimize WARNING! the risk of fire or explosion, electric shock, or to prevent property damage, personal injury, or loss of life. IMPORTANT SAFETY INSTRUCTIONS WARNING To reduce the risk of fire, electric shock, or injury to persons when using... -
Page 4: Specifications
pecifications Power Plug • If the supply cord is damaged, it must be replaced by the manufacturer or its service agents Drawer or a similarly qualified person in order to avoid a hazard. (For detergent and fabric softener) Control Panel Drain Hose Drum Door... -
Page 5: Installation
nstallation Install or store where it will not be exposed to temperatures below freezing or exposed to the weather. Properly ground washer to conform with all governing codes and ordinances. The base opening must not be obstructed by carpeting when the washing machine is installed on a carpeted floor. - Page 6 nstallation Installation place requirement Level floor : Drain Hose Allowable slope under entire washer is 1˚ Washer Power outlet : Must be within 1.5 meters of either side of location of washer. Do not overload the outlet with more than one appliance.
- Page 7 nstallation ■ Electrical connection 1. Do not use an extension cord or double adapter. 2. If the supply cord is damaged, it must be replaced by the manufacturer or its service agents or similarly qualified person in order to avoid a hazard. 3.
- Page 8 nstallation ■ Normal Tap without thread & screw type inlet hose Unscrew the fixing screw to Push the connector up till the Push the water supply hose attach the tap. rubber packing is in tight vertically upwards so that the contact with the tap.
- Page 9 nstallation This equipment is not designed for maritime use or for use mobile installations such as caravans, aircraft etc. Turn off the stopcock if the machine is to be left for any length of time (e.g. holiday), especially if there is no floor drain(gully) in the immediate vicinity. When disposing of the appliance, cut off the mains cable, and destroy the plug Disable the door lock to prevent young children being trapped inside.
- Page 10 • If possible install the washer in one of the corners of the room, where the floor is more stable. Insert the rubber cups to reduce vibration. You can obtain the rubber cups (p/no.4620ER4002B) from the LG spares dept. Important! •...
-
Page 11: Care Before Washing
are before washing Before the first washing Select a cycle (COTTON ( ) 60°C, add a half load of detergent) allow the unit to wash without clothing. This will remove residues and water from the drum that may have been left during manufacturing. -
Page 12: Adding Detergent
dding detergent Adding detergent and fabric softener 1. The Dispenser Drawer • Main wash only ➔ • Pre Wash + Main Wash ➔ Detergent for Fabric Detergent main wash softener for pre wash 2. Adding Fabric Softener • Do not exceed the maximum fill line. Close the dispenser drawer slowly. - Page 13 dding detergent ❋ Tips 3. Detergent dosage Full load : according to manufacturer’s recommendation. • The detergent should be used according to the Part load : 3/4 of the normal instruction of the detergent manufacture. amount. • If too much detergent is used, too many suds Minimum load : 1/2 of full load.
-
Page 14: Function
unction Recommended courses according to the laundry type Maximum Proper Temp. Option Program Fabric Type Load Color fast gaments (shirts, 60˚C Cotton night dresses, Rating [Cold ( ), 30˚C, pajamas...)and lightly soiled 40°C, 95°C] white cotton(underwear...) - Medic Rinse( - Intensive( Synthetic Less than Polyamide, Acryic, Polyester... -
Page 15: How To Use Washer
ow to use washer 1. Cotton automatically 2. Manual Selecting selected upon power on. • Press the Power button to start. • Press the Power button to start. • Press the Start/Pause button. • Select the conditions which you want to use, by turning the program dial and •... - Page 16 ow to use washer (1) Dial : Program (5) Button : Power (9) Button : Crease Care (2) Button : Start/Pause (6) Button : Medic Rinse (10) Child Lock (3) Button : Spin (7) Button : Pre Wash (11) Tub Clean (4) Button : Temperature (8) Button : Intensive (12) Button : Time Delay...
- Page 17 ow to use washer Start/Pause Option • By pressing the Option button, all Option functions may be selected. 1. Start • This Start/Pause button is used to start wash cycle or pause the wash cycle. 2. Pause 1. Medic Rinse( •...
- Page 18 ow to use washer Tub Clean Child Lock( If you choose to lock the buttons on the control Tub Clean course can be set by pressing and assembly to prevent tampering this function may holding Intensive( ) and Crease Care( be selected.
- Page 19 ow to use washer Spin( • After selecting the spin course, the spin speed can be chosen by pressing the spin button. [F1222ND(1~9)] [F1022ND(1~9)] 1. Spin selection 2. No spin( • Spin Speed is available according to the program • If No spin is selected, the washer stops after as follows.
- Page 20 ow to use washer Water Temp.( Time Delay( • By pressing the Temp. button, the water temperature can be selected. Preparing washing before starting “Time Delay” - Cold - Turn on the water tap. - 30˚C / 40˚C / 60˚C / 95˚C - Load laundry and close the door.
- Page 21 ow to use washer Display 3. Completion of washing • When washing cycle is completed, “ ” is displayed on the “Multi display”. 4. Time left 1. Special function display • During washing cycle, the remaining washing time • When child lock is selected, the is displayed.
-
Page 22: Maintenance
aintenance ❋ Before cleaning the washer interior, unplug the electrical power cord to avoid electrical shock to avoid electrical shock hazards. ❋ When disposing of the appliance, cut off the mains cable, and destroy the plug Disable the door lock to prevent young children being trapped inside. The water inlet filter - "... - Page 23 aintenance The drain pump filter ❋ The drain filter collects threads and small objects left in the laundry. Check regularly that the filter is clean to ensure smooth running of your machine. CAUTION First drain using the drain hose and then open the pump filter to remove whatever any threads or objects.
- Page 24 aintenance ■ Dispenser drawer ❋ After a while detergents and fabric softeners leave a deposit in the drawer. • It should be cleaned from time to time with a jet of running water. • If necessary it can be removed completely from the machine by pressing the catch downwards and by pulling it out.
- Page 25 aintenance Cleaning your washer 1. Exterior Proper care of your washer can extend its life. The outside of the machine can be cleaned with warm water and a neutral non abrasive household detergent. Immediately wipe off any spills. Wipe with damp cloth. Try not to hit surface with sharp objects.
-
Page 26: Troubleshooting Guide
roubleshooting guide ❋ This washing machine is equipped with automatic safety functions which detect and diagnose faults at an early stage and react appropriately When the machine does not function properly or does not function at all, check the following points before you contact your service provider. - Page 27 roubleshooting guide Symptom Possible Cause Solution Washer does not start • Electrical power cord may not Make sure plug fits tightly in wall be plugged in or connection outlet. may be loose. • House fuse blown, circuit Reset circuit breaker or replace fuse. breaker tripped,or a power Do not increase fuse capacity.
- Page 28 roubleshooting guide Symptom Possible Cause Solution • Water supply is not adequate in area. Check another tap in the house. • Water supply taps are not completely open. Fully open tap. • Water inlet hose(s) are kinked. Straighten hose(s). • The filter of the inlet hose(s) are clogged. Check the filter of the inlet hose.
-
Page 29: Terms Of Warranty
erms of Warranty Disposal of your old appliance 1. When this crossed-out wheeled bin symbol is attached to a product it means the product is covered by the European Directive 2002/96/EC. 2. All electrical and electronic products should be disposed of separately from the municipal waste stream via designated collection facilities appointed by the government or the local authorities. - Page 32 P/No.: MFL49491565...