Axis 2110 User Manual page 34

Choosing Your Application
34
Uploading Images to Your Internet Service Provider
Perfect for Web attractions, remote light surveillance and process control applications; the
AXIS 2110 can be quickly configured to dial-out from any remote location and transmit
live images to several users, or the whole Internet community - via your preferred Internet
Service Provider. Select any of the Public ISPs supported in the Application Wizard, or
alternatively, specify another ISP of your choosing.
AXIS 2110
Having established the Dial-up connection for your AXIS 2110, continue your
configuration using the Installation Wizard, to develop an active application that uploads
live images to a designated ISP over normal phone lines. Your image files are transmitted
as a sequential stream, or restricted to specified time periods. You set the times and the
frequency at which images are taken and uploaded to the ISP.
Installation and Configuration Overview
Configure the AXIS 2110 to upload images to an Internet Service Provider, as follows:
1. Connect the AXIS 2110 to the network if available. Otherwise, use the supplied Null Modem Cable.
2. Install the camera as a modem. See Using Your Camera with a Modem, on page 14 for more information.
3. Create a dedicated Dial-up connection.
4. Refine the Dial-up parameters.
5. Initiate the Dial-up connection.
6. Referring to Configuring Your Camera, on page 20, open the Home Page in your browser and start the Installation Wizard.
Complete the Wizard to establish the standard Security, Date and Time, Image General Layout and Modem settings - selecting
modem as your chosen method of connection.
7. Continue the configuration using the Application Wizard to define your preferred ISP and mode of operation - choosing
Sequential mode to upload an image sequence that is unlimited or restricted between specified time periods, but independent
of any alarm event.
8. Disconnect the camera from the network or Null Modem Cable and connect it directly to your modem.
9. Your application is complete. You should now verify the installation by accessing the images now stored with your ISP.
Notes:
•By configuring the AXIS 2110 to accept incoming calls, you can at any time refine or amend the
product configuration remotely via a Dial-up connection - or locally, either from the Ethernet
network or via a computer connected via the supplied Null Modem Cable.
•You can refine your application using the Web-based Administration Tools.
Modem
Internet
ISP
AXIS 2110 User's Manual
Browser