AXIS 2110 Installation Guide - English Installing Your Camera on a Network Follow the guide below to quickly install your AXIS 2110 on an Ethernet network: Important! For details on installing the AXIS 2110 to a modem, see page 2.
AXIS 2110 Installation Guide - English Verifying and Completing the Installation From Your Browser To access the AXIS 2110 Home Page, start your browser and enter the IP address in the location/ address field, e.g. 171.21.1.200. Click the Installation Wizard link. The wizard guides you through the remaining installation procedures and will help you configure your application.
Page 4
AXIS 2110 Installation Guide - English Creating a Dial-Up Networking Connection... Follow the steps below to create a dedicated Dial-Up networking connection to your AXIS 2110: D ouble-click My Computer and then double-click the Dial-Up Networking icon. T o significantly improve the...
AXIS 2110 Installation Guide - English Refining the Dial-Up Networking Properties... Having created the Dial-Up connection for your AXIS 2110, follow the steps below to refine the connection properties: F rom the Dial-Up Networking dialog, right click the dedicated Dial-Up connection previously created for your AXIS 2110 (Axis- Camera was the connection created used in this and previous examples).
Important! Although the AXIS 2110 is intended for indoor and outdoor use, it is important to note that the charged coupled device (CCD) in the camera can become permanently damaged if it is exposed to too much direct sunlight, or halo- gen light.