Hitachi RAS-40CNH2 Use & Care Manual page 13

2
Set the
(TIME) button.
AM
PM
2
Set the turn-off time with the
TIMER control button.
2
Set the turn-on time with the
TIMER control button.
4
Set the turn-on time with the
TIMER control button.
The timer may be used in three ways: off-timer, on-timer, and ON/OFF (OFF/ON)-timer. Set
the current time at first because it serves as a reference.
As the time settings are stored in memory in the remote controller, you only have to press
the (RESERVE) button in order to use the same settings next time.
(EN2) RAS/RAC-40/50CHN2
3
Set the current time with the
TIMER control button.
PM
Example: The current time is 1:30 p.m.
3
Point the signal window of the remote controller toward the indoor unit, and
press the (RESERVE) button.
The (OFF) mark starts lighting instead of flashing and the sign
lights. A beep occurs and the
PM
3
Point the signal window of the remote controller toward the indoor unit, and
press the (RESERVE) button.
The (ON) mark starts lighting instead of flashing and the
lights. A beep occurs and the
AM
5
Point the signal window of the remote controller toward the indoor unit, and
press the (RESERVE) button.
The (ON) mark starts lighting instead of flashing and the
lights. A beep occurs and the
PM
AM
13
4
Press the (TIME) button again.
The time indication starts lighting
instead of flashing.
PM
(TIMER) lamp lights on the indoor unit.
Example: The device will turn off at 11:00p.m.
PM
The setting of turn-off time is now complete.
(TIMER) lamp lights on the indoor unit.
Example:
The device will automatically turn on earlier so that the preset
AM
temperature can be reached at 7:00 a.m.
The setting of the turn-on time is now complete.
(TIMER) lamp lights on the indoor unit.
Example:
PM
The device will turn off at 10:30 p.m. and then automatically
turn on earlier so that the preset temperature can be reached
AM
at 7:00 a.m.
The settings of the turn-on/off times are now complete.
– 13 –
3/25/05, 2:38
The time indication will disappear
automatically in 10 second.
To check the current time setting,
press the (TIME) button twice.
The setting of the current time is
now complete.
(RESERVED)
(RESERVED) sign
(RESERVED) sign