Table of Contents
Advertisement
5. ELECTRICAL ADJUSTMENT
5-1. Preparation
< Test Equipments and Jigs >
.
Personal computer (Windows P/C, OS:windows 95/98)
.
Adjustment software
SINGO98.exe, TLPX10S.exe, CNTX10S.exe
.
.
RGB cable, Serial control cable (for RS-232C)
Oscilloscope
.
Digital voltmeter
.
Extension cable kit (Refer to page 2-7)
< Connection and Setting of Personal Computer >
(1) Connection of personal computer
Connect a computer as shown in following Fig. 1-4-1.
Use the supplied serial control cable for connection.
RGB cable
Serial control cable
Fig. 1-4-1
(2) Data download/upload software
When the download software (CTLX10S.EXE) is
started, screen like the following image (Fig. 1-4-2)
Fig. 1-4-2
TEST PATERN
Install singo98.exe
CONTROL
Install TLPX10S.exe
and CTLX10S.exe
(3) Adjustment software
Electrical adjustment is carried out using the adjustment
software. When the software (TLPX10S.EXE)is started,
a screen like the following image (Fig. 1-4-3) appears.
(Note)
Electrical adjustment menu changes automatically by
pressing [next] button with every step. This software
transmits the necessary command automatically.
1-36
Fig. 1-4-3
Advertisement
Table of Contents
