Chapter 7
Electrical Adjustment
Preparation
< Test equipment >
1) Personal computer
(Windows PC, OS: Windows 98SE, ME, 2000, XP)
2) Signal generating software
SINGOWS2000.MSI (Installer)
3) Adjustment software
DPJAdjustmentTool_2500.exe
4) Cables
RGB Cable and Control (RS232C) Cable
5) A protractor for Vertical Auto Keystone Calibration
<For connection and setting of Personal computer>
1) Connection of personal computer
Connect the PC to computer 1 input and RS232C terminal as shown in following Fig.1
2) Set the screen resolution and refresh rate to XGA (1024x768) 60Hertz.
Set RGB output of the PC to CRT.
Control cable
Fig.1
And, to Control PC (the same PC)
7-1
Chapter 7