To Check The Programmed Order - Teac CD-P650 Owner's Manual

CD USB

To check the programmed order

In stop mode, press the PROGRAM button repeatedly. The track/file
number and program number will be shown on the display.
CD USB
To change or add a track/file to the program
1 In stop mode, press the PROGRAM button repeatedly until
the program number for which you want to change the
track/file appears on the display.
Select a track/file using the SKIP buttons (.//).
2
The previous track/file is replaced with the newly selected one.
If you want to add a track/file to the end of the program, press the
PROGRAM button repeatedly until "P-END" briefly appears on the
display. Then select a track/file using the SKIP buttons (.//)
. The track/file is added to the program.
18
Programmed Playback 2
You can also use the numeric buttons.
For example, to select track/file number 25, press "2" first then "5".
To select numbers less than 10, press "0" and then the number. As
an example, to select number 5, press "0" then "5". (Optionally, you
may press just the number "5" and wait for a few seconds.)
Press the PROGRAM button.
3
The program is overwritten.
CD
To delete a track/file from the program
In the stop mode, press the PROGRAM button repeatedly
1
until the program number of the track to be deleted
appears on the display.
Press the CLEAR button.
2
The selected track/file is deleted from the program.
USB