Table of Contents
Advertisement
(7) GSM antenna trace (RF connector function check)
To identify whether the GSM antaean trace is conducted or not, the
conductivity of CON1801 should be examined. This conductivity could be measured
between L1803 and R1833 with the light meter. If the conductivity is poor, it means
the CON1801 (RF connector) is broken. Please replace this one with a new MS162.
After the replacement, please check the conductivity of the GSM antenna trace
again.
unction check, testing results
Rx f
(1) CON1801 function
Test point : C1806
華
碩
電
腦
華
碩
電
腦
GTC ■ Service Manual
68
Advertisement
Table of Contents
Troubleshooting
