Connecting The Remote Control Unit - Kenwood KSC-SW10 Instruction Manual

Powered enclosed subwoofer

Hide thumbs Also See for KSC-SW10:

Table of Contents

Connection

Caution:

Before wiring, be sure to remove the wire from the negative terminal of the battery. After completing all wiring, check the correct wirings

again. After checking, connect the wire from the negative terminal of the battery.

Terminals of Subwoofer

Connecting the remote control unit

Notes:

• If the cord is not connected properly, the power indicator on the remote control unit and the illumination on the main unit do not light up.

• If the remote control unit is not connected properly or at all, the subwoofer does not output the sound.

• Do not insert the remote control connector upside down or forcibly. Otherwise, malfunction may result.

English

Connect with the lock part

of remote control jack facing

down.

8 Remote control

Autogood products internet store http://130.com.ua

POWER/SPEAKER INPUT terminal

(for Speaker cords)

REMOTE terminal

LINE IN terminal

(for RCA pin jack)

Table of Contents