AcuRite 01098CDI Instruction Manual

AcuRite 01098CDI Instruction Manual

Weather forcaster

Advertisement

Quick Links

LIMITED ONE YEAR WARRANTY
Chaney Instrument Company warrants that all products it manufactures to be of good material and workmanship and to be free of
defects if properly installed and operated for a period of one year from date of purchase. REMEDY FOR BREACH OF THIS
WARRANTY IS EXPRESSLY LIMITED TO REPAIR OR REPLACEMENT OF DEFECTIVE ITEMS. Any product which, under normal use
and service, is proven to breach the warranty contained herein within ONE YEAR from date of sale will, upon examination by
Chaney, and at its sole option, be repaired or replaced by Chaney. In all cases, transportation costs and charges for returned
goods shall be paid for by the purchaser. Chaney hereby disclaims all responsibility for such transportation costs and charges.
This warranty will not be breached, and Chaney will give no credit for products it manufactures which shall have received normal
wear and tear, been damaged, tampered, abused, improperly installed, damaged in shipping, or repaired or altered by others than
authorized representatives of Chaney.
THE ABOVE-DESCRIBED WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, AND ALL
OTHER WARRANTIES ARE HEREBY EXPRESSLY DISCLAIMED, INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTY OF
MERCHANTABILITY AND THE IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE. CHANEY EXPRESSLY DISCLAIMS
ALL LIABILITY FOR SPECIAL, CONSEQUENTIAL OR INCIDENTAL DAMAGES, WHETHER ARISING IN TORT OR BY CONTRACT FROM
ANY BREACH OF THIS WARRANTY. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR
CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU. CHANEY FURTHER DISCLAIMS
ALL LIABILITY FROM PERSONAL INJURY RELATING TO ITS PRODUCTS TO THE EXTENT PERMITTED BY LAW. BY ACCEPTANCE
OF ANY OF CHANEY'S EQUIPMENT OR PRODUCTS, THE PURCHASER ASSUMES ALL LIABILITY FOR THE CONSEQUENCES
ARISING FROM THEIR USE OR MISUSE. NO PERSON, FIRM OR CORPORATION IS AUTHORIZED TO ASSUME FOR CHANEY ANY
OTHER LIABILITY IN CONNECTION WITH THE SALE OF ITS PRODUCTS. FURTHERMORE, NO PERSON, FIRM OR CORPORATION IS
AUTHORIZED TO MODIFY OR WAIVE THE TERMS OF THIS PARAGRAPH, AND THE PRECEDING PARAGRAPH, UNLESS DONE IN
WRITING AND SIGNED BY A DULY AUTHORIZED AGENT OF CHANEY. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND
YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.
For in-warranty repair, please contact:
Customer Care Department
Chaney Instrument Company
965 Wells Street
Lake Geneva, WI 53147
This device complies with part 15 of the FCC rules. Operation is subject to the
following two conditions:
1- This device may NOT cause harmful interference, and
2- This device must accept any interference received, including interference that
may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, There is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized
model# 01098CDI
modifications to this equipment. Such modifications could void the user authority to operate the
equipment.
01098CDI INST 060512

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 01098CDI and is the answer not in the manual?

Questions and answers

J B
April 17, 2025

I was given a 1098cdi and the indoor humidity is 12% less than the outdoor even though they are next to each other all day, can it be offset?

2 comments:
JB
April 17, 2025

@J B I used my breath on both the base and the remote to prove the values can change and they do then return to the value displayed before..

Mr. Anderson
May 9, 2025

No, the indoor humidity on an AcuRite 01098CDI cannot be manually adjusted.

This answer is automatically generated

Steve Parker
May 29, 2025

Can brightness of display be adjusted . Model 01098cdi

Summary of Contents for AcuRite 01098CDI

  • Page 1 • Consult the dealer or an experienced radio/TV technician for help. NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized model# 01098CDI modifications to this equipment. Such modifications could void the user authority to operate the equipment. 01098CDI INST 060512...
  • Page 2 Overview SETUP Introduction A/B/C Wireless Selection Thank You for purchasing this AcuRite product. Please read through ® To allow for more than one weather station and wireless sensor this manual in itʼs entirety to fully enjoy the benefits and features of this network to be used in close proximity, the display unit and the product.
  • Page 3 SETUP PLACEMENT About the Intelli-Time Clock ® Now that setup is complete, you must choose a location to place the sensor and the display unit. The sensor MUST be placed less than 330 feet (100 This weather station is equipped with Intelli-Time ®...
  • Page 4 In high pressure areas, the air is dense and relatively cool, which causes it to sink. The water vapor in the sinking air doesnʼt condense, resulting in clear skies. Please visit AcuRite.com for the complete list of forecast icon definitions...
  • Page 5 PRODUCT REGISTRATION To receive product updates The display may fail to start properly due to static and information, Go to discharge. www.AcuRite.com Batteries may need replacing. Register a Product Check that batteries are correctly installed. Display Console Screen Not Working...
  • Page 6 PLEASE DISPOSE OF OLD OR DEFECTIVE BATTERIES IN AN ENVIRONMENTALLY SAFE WAY AND IN ACCORDANCE WITH YOUR LOCAL LAWS AND REGULATIONS. BATTERY SAFETY: Clean the battery contacts and also those of the device prior to battery installation. Remove battteries from equipment which is not to be used for an extended perid of time.

Table of Contents