Haier AB242ACBEA Service Manual page 66

" High mode " Operation
A
U
T
O
TEMP
ON
OFF
SWING
MODE SLEEP
HEALTH FRESH
CLOCK SET
TIMER HIGH/SO
FILTER
LIGHT LOCK
RESET CODE
NOTICE:
When the air conditioner is operating in " High Mode " , unevenness of room air temperature
may occur due to the intensive operation in a short time.
Anyway, operation in "High Mode", does not last for more than 15 minutes, then regular
operation is automatically restored.
Outline of operation in "High Mode"
This function is suitable when the set temperature must be
reached in the shortest delay.
The button "HIGH/SO", referred to this function, is effective
A
in Cooling/Heating mode (not in Auto/Dry/Fan modes).
Press the HIGH/SO button noce
The indication
FAN
controller and operation in "High Mode" starts.
The AUTO fan speed is automatically set and the corresponding
indication is also displayed.
1
Press the HIGH/SO button twice
If the button is pressed once, the indication
on the remote controller. If you press the button once again,
the indication disappears, regular operation is restored and fan
speed goes back to the mode set before "High Mode" operation.
ON
appears on the display of the remote
OFF
is displayed