Transferring With Camp-On; Call Waiting; Set Answer Mode; Forwarding Calls - Samsung iDCS 28D Quick Reference Manual

Phone and voicemail

Hide thumbs Also See for iDCS 28D:

User manual (44 pages)

User instructions (155 pages)

User instruction (140 pages)

Table Of Contents

Table of Contents

Enlarged version

FORWARDING CALLS

You can forward your calls to another station, group of stations, or an external telephone

number. Program a destination for the type of forwarding you want as detailed below. If

FWD ALL, FWD BUSY,

you have the

soft key to activate the feature. A steady red light reminds you what forward condition is

activated.

Clear all call forward conditions set at your station by lifting the handset and dialing

FORWARD ALL CALLS

To forward all your calls to another station:

601

Dial

plus the extension or group number.

Receive a confirmation tone and hang up.

FORWARD BUSY

To forward calls to another station when you are on the phone:

602

Dial

plus the extension or group number.

Receive a confirmation tone and hang up.

FORWARD NO ANSWER

To forward calls to another station when you do not answer:

603

Dial

plus the extension or group number.

Receive a confirmation tone and hang up.

FORWARD BUSY/NO ANSWER

If you have both a Forward On Busy destination and a Forward No Answer destination

programmed, you can activate them simultaneously:

604.

Dial

Receive a confirmation tone and hang up.

SET ANSWER MODE

You can receive internal call in one of three modes:

TRANSFER

While on-hook, press

Dial

for Ringing,

for Auto Answer or

TRANSFER

Press

to store your selection.

NOTE: When your keyset is programmed for Auto Answer and you have Forward No

Answer (FNA) turned on, you must answer screened transfers by pressing the

key before your FNA timer expires or the call will forward.

FWD NO ANSWER

and

keys, press the associated

103.

and then dial

for Voice Announce.

When you transfer a call to another station and receive a busy signal, you can camp the call on

to this station. Hang up when you hear the busy signal. The called party is alerted that a call is

waiting.

NOTE: If you receive No More Calls tone, the station has no key available to receive another

call. Press

600.

If an outside call is camped-on to your telephone or another station is camped-on to you:

Your keyset rings and the call that is waiting (camped-on) flashes green.

Press the flashing button to answer; the other call is put on hold automatically if

your station has the Automatic Hold feature set. If not, you must press

then the flashing button or finish the call and hang up; the waiting call will ring.

Lift the handset or press the

NOTE: Intercom calls will not go on Automatic Hold.

To make a conference call while engaged in a conversation:

Press the

Make another call, either intercom or outside, press the

conference tone.

Make another call or press the

up to five parties (you and four others).

Repeat the last step until all parties are added. Hang up to leave the conference

call.

NOTE: When attempting to add another party to the conference and you are not able to

reach the desired person, hang up. Press the

previous conversation.

ANS/RLS