Advertisement
TRANSFERRING WITH CAMP-ON
When you are transferring a call to another station and you receive a busy sig-
nal, you may camp the call on to this station. Simply hang up when you hear the
busy signal. The called party will be alerted that a call is waiting for them.
NOTE:
If you receive No More Calls tone, the station has no key available to
receive another call. Press TRANSFER to return to the outside caller.
If an outside call has been camped-on to your telephone or another station has
camped-on to you:
Your keyset will ring and the call that is waiting for you (camped-on) will
flash green.
Press the flashing button to answer; your other call will go on hold automat-
ically if your station has the Automatic Hold feature set. If not, you must
press HOLD and then the flashing button or finish the call and hang up; the
waiting call will ring.
Lift the handset or press the ANS/RLS key to answer.
NOTE:
Intercom calls will not go on Automatic Hold.
To make a conference call, while engaged in a conversation:
Press the CONF button and receive conference tone.
Make another call, either intercom or outside, press the CONF button and
receive conference tone.
Make another call or press the CONF button to join all parties.You may con-
ference up to five parties (you and four others).
Repeat the last step until all parties are added.
To leave the conference, hang up.
NOTE:
When attempting to add another party to the conference and you are
not able to reach the desired person, hang up. Simply press the CONF
button again to return to the previous conversation.
CALL WAITING
CONFERENCE CALLS
Advertisement
