Panasonic Workio DP-C262 Function Manual page 30

User Parameters
No.
10-19 16 LDAP Server IP
17 LDAP User Name
18 LDAP Password
19 LDAP Search Base
20-29 21 Default Subject
22 Default Domain
25 Selectable Domain (01)
26 Selectable Domain (02)
27 Selectable Domain (03)
28 Selectable Domain (04)
29 Selectable Domain (05)
30-39 30 Selectable Domain (06)
31 Selectable Domain (07)
32 Selectable Domain (08)
33 Selectable Domain (09)
34 Selectable Domain (10)
35 Remote Password
36 Relay XMT Password
30
Parameter
When "29 DNS Server Address" in General
Settings is set to "No", set the LDAP Server
IP Address.
Refer to Example : LDAP Server (see
page 46).
Set the LDAP User Name.
Refer to Example : LDAP Server (see
page 46).
Set the LDAP Password.
Refer to Example : LDAP Server (see
page 46).
Set the LDAP database to search.
Refer to Example : LDAP Server (see
page 46).
Set the information added to the Subject
Line for all outgoing Emails.
Set the Domain Name added to frequently
used or incomplete outgoing Email
Addresses.
Ex: panasonic.com
Set Domain Names to display on the domain
list. Up to 10 domain names can be set.
After entering the part of the Email Address
preceding at mark "@", select the desired
domain name.
Set the password for the remote registration
of the internet parameters, address book
and the acquisition of a communication
management report via Email.
Set the LAN relay password to provide
network security to your Relay Station.
Refer to Example : Relay Station (LAN
Relay) (see page 58).
Comments Selective Standard
Setting
Item
3 digits x 4
Up to 40
characters
Up to 10
characters
Up to 60
characters
Up to 40
characters
Up to 50
characters
Up to 30
characters
Up to 10
characters
Up to 10
characters