Panasonic Workio DP-C262 Function Manual page 16

Key Operator
No.
60-79 61 SMB Device
Name
62 SMB Workgroup
Name
63 SMB Comment
64 Rendezvous
65 Rendezvous
Name
66 IPv6
70 Auto Tone Adjust
71 Tone Adjust Reset
73 Administrator
Name
74 Authentication
Method
75 User
Authentication
16
Parameter
Set the device name for Microsoft
Network (SMB).
Set the working group name for
Microsoft Network (SMB).
Set comments about the machine
used for Microsoft Network (SMB).
Set the Rendezvous.
When the optional Printer Controller
Module (for Adobe
installed.
Set the name of Rendezvous.
When the optional Printer Controller
Module (for Adobe
installed.
Set "On" when using the machine for
IPv6.
For details about setting IPv6, refer to
Embedded Web Server in the
Document Management System (For
Embedded Web Launcher and Web
Server) on the provided CD-ROM.
If the colored image tone has deviated, set
the automatic tone adjustment.
<Procedure>
1. Execute this mode to print the calibration
sheet.
2. Place the calibration sheet on the platen
and execute this mode again.
If "70 Auto Tone Adjust" has made the
original tone unidentifiable, execute this
mode to reset the machine to the original
tone at shipping.
When "75 User Authentication" is set to
"On" and selecting Local Machine as
domain, set administrator's name and
password for authentication.
When "75 User Authentication" is set to
"On", set the authentication method.
Set the User Authentication, and then
select "Off" or "On" for selected function.
Comments
® PostScript ® 3 ™ ) is
PostScript 3 ) is
® ® ™
No.61 to 66
After setting, turn the machine's power switch Off,
and then On again.
Selective Item Standard
Setting
Up to 15 characters
Up to 15 characters
Up to 48 characters
Off, On Off
Up to 31 characters
Off, On Off
Stop, Start Stop
Stop, Start Stop
Up to 40 characters
NTLM, Clr Text NTLM
Copy, Fax, Print,
Scan
(Off, On)