Access Authorisation Via Smartcard; Access Protection With Systemlock - Fujitsu ESPRIMO P5635 Operating Manual

Access authorisation via SmartCard

Accesspermission,SmartCard Securityfunctions,
In systems equipped with a SmartCard reader, access can be restricted to those
users who have a corresponding SmartCard.

Access protection with SystemLock

Securityfunctions, Securityfunctions,
With SystemLock, you can protect your system from unauthorised booting. A system can then only
be booted when the user inserts a valid SmartCard into the SmartCard reader and enters his/her
personal code number (PIN). To use SystemLock, you require the following components:
• External or internal SmartCard reader
• SystemLock installed (see "BIOS Setup" manual)
• SmartCard
SystemLock controls access to your device. When a SmartCard is initialised, permissions
are assigned for system access (system, setup, system+setup, admin). You can configure
several SmartCards for one system and initialise them with different permissions. In
addition, you can protect access to your hard disk
In this way users can be divided into user groups. Users of a user group
use SmartCards with the same permissions.
If you also want to use other security software in addition to SystemLock (e.g. SMARTY),
please read your security software documentation beforehand.
SystemLock rights
You can initialise a SmartCard with one of the following rights:
System
Setup
System+Setup
Admin
For instructions on how to install and use SystemLock, and how to initialise
SmartCards, see the "BIOS Setup" manual.
Operating the SmartCard reader
► Connect the external SmartCard reader to your system as described in
the instructions for the SmartCard reader.
SmartCard reader,
After the device is switched on, you will be prompted to insert your SmartCard.
Fujitsu Technology Solutions
The system starts following entry of the user PIN. You can change the user
PIN.
You can open and change the BIOS Setup and change the user PIN.
The system starts following entry of the user PIN. You can open and change
the BIOS Setup and change the user PIN.
The system starts following entry of the user PIN. You can change the user
PIN and the administrator PIN, unlock locked SmartCards, open and change
the BIOS Setup and generate additional SmartCards for this system.
Operation
29