Connecting External Devices; Cable Connecting; Disconnecting Cables - Fujitsu ESPRIMO P5635 Operating Manual

Connecting external devices

Read the documentation on the external device before connecting it.
With the exception of USB devices, always remove all power plugs
before connecting external devices!
Do not connect or disconnect cables during a thunderstorm.
Always take hold of the actual plug when disconnecting a cable. Never pull the cable!
Connect and disconnect the cables in the order described below.

Cable connecting

► Switch off all affected devices.
Cable Cord
► Remove power plugs from the mains outlets for all devices.
► Plug all cables into the device and peripherals. Please make sure that you always
observe the safety notes provided in
► Plug all data communication cables into the sockets provided for the data
/ telecommunication networks.
► Plug all power cables into the grounded mains outlets.

Disconnecting cables

► Switch off all affected devices.
Cable
► Remove power plugs from the mains outlets for all devices.
► Unplug all data communication cables from the utility sockets.
► Unplug all cables from the device and peripherals.
USB devices are hot-pluggable. This means you can connect and disconnect
USB cables while your device is switched on.
Additional information can be found in
ports", Page 21
Fujitsu Technology Solutions
"Important notes", Page
and in the documentation for the USB devices.
9.
"Connecting external devices to the USB
Getting started
17