Low-Profile Boards; Fitting A Slot Adapter - Fujitsu ESPRIMO P5635 Operating Manual

System expansions
► Close the casing (see
If you have installed or removed a PCI board, please check the relevant PCI
slot settings in the BIOS Setup. If necessary, change the settings. Further
information is provided in the PCI board documentation.
Low-profile boards
Low-profileboard
You will need to fit a corresponding slot adapter first before you can install a
low-profile board in a normal board slot.
Two-piece slot covers are fitted to the slots intended for low-profile boards. The
two pieces are joined together by a screw.
Do not throw away the slot cover. For cooling, protection against fire and in order to
comply with EMC regulations, you must refit the slot cover if you remove the board.
EMC,electromagnetic compatibility
► Remove the required slot cover (see

Fitting a slot adapter

► Fit the slot adapter to the slot cover of the low-profile board (1) and screw tight (2).
Low-profile boards,
Now you can install the low-profile board in a suitable slot like a normal board
(see "Installing and removing a board", Page
48
"Closing the casing", Page
"Installing and removing a board", Page
1
2
38).
45).
Fujitsu Technology Solutions
45).