LG UB85 Series Owner's Manual page 22

22
ASSEMBLING AND PREPARING
UC97**
1
M4 x L10
4EA
Stand Body
Stand Base
2
1
2
1 Attach the stand to the TV using the upper
mounting hole on the back of the TV.
2 Attach the stand to the TV using the lower
connection on the back of the TV.
1
2
1
2
Stand Body
3
M4 x L20
4EA
CAUTION
y When attaching the stand to the TV
set, place the screen facing down on a
cushioned table or flat surface to protect the
screen from scratches.
y When attaching the stand to the TV set, do
not remove the protective packaging and
place the screen facing down on a table or
flat surface. (Only UC97**, UD97**)
y Make sure that the screws are fastened
completely. (If they are not fastened
securely enough, the TV may tilt forward
after being installed.)
Do not fasten the screws with excessive
force otherwise they may be worn out and
become loose.
NOTE
y Remove the stand before installing the TV
on a wall mount by performing the stand
attachment in reverse.
y Remove the protective film from the stand
base and then attach the stand body to the
stand base. (Only UC97**, UD97**)