Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for LG 65UB980V.AEK
Summary of Contents for LG 65UB980V.AEK
- Page 1 OWNER’S MANUAL LED TV* LG LED TVs are LCD TVs with LED backlighting. Click! User Guide Please read this manual carefully before operating your set and retain it for future reference. UB85** UB98** UB93** UC97** UB95** www.lg.com *MFL68066606* P/NO : MFL68066606 (1408-REV03)
-
Page 2: Table Of Contents
TABLE OF CONTENTS TABLE OF CONTENTS Audio Connection LICENSES - Digital optical audio Connection Headphone Connection OPEN SOURCE SOFTWARE USB Connection NOTICE CI module Connection Euro Scart Connection EXTERNAL CONTROL DEVICE SETUP REMOTE CONTROL SAFETY INSTRUCTIONS MAGIC REMOTE FUNCTIONS - Viewing 3D Imaging (Only 3D models) Registering Magic Remote How to use Magic Remote INSTALLATION PROCEDURE... -
Page 3: Licenses
In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download. LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping and handling) upon email request to opensource@lge.com. -
Page 4: Safety Instructions
SAFETY INSTRUCTIONS SAFETY INSTRUCTIONS Please read these safety precautions carefully before using the product. WARNING Do not place the TV and/or remote control in the following environments: - A location exposed to direct sunlight - An area with high humidity such as a bathroom - Near any heat source such as stoves and other devices that produce heat - Near kitchen counters or humidifiers where they can easily be exposed to steam or - An area exposed to rain or wind... - Page 5 SAFETY INSTRUCTIONS Bend antenna cable between inside and outside building to prevent rain from flowing in. This may cause water damaged inside the Product and could give an electric shock. When mounting TV onto wall make sure to neatly install and isolate cabling from rear of TV as to not create possibility of electric shock/fire hazard.
- Page 6 SAFETY INSTRUCTIONS Do not spray water on the product or scrub with an inflammable substance (thinner or benzene). Fire or electric shock accident can occur. Do not allow any impact, shock or any objects to fall into the unit, and do not drop anything onto the screen.
- Page 7 SAFETY INSTRUCTIONS CAUTION Install the product where no radio wave occurs. There should be enough distance between an outside antenna and power lines to keep the former from touching the latter even when the antenna falls. This may cause an electric shock. Do not install the product on places such as unstable shelves or inclined surfaces.
- Page 8 SAFETY INSTRUCTIONS Make sure there are no objects between the remote control and its sensor. Signal from Remote Control can be interrupted due to external/internal lighting eg Sunlight, fluorescent lighting. If this occurs turn off lighting or darken viewing area. When connecting external devices such as video game consoles, make sure the connecting cables are long enough.
- Page 9 SAFETY INSTRUCTIONS Avoid touching the screen or holding your finger(s) against it for long periods of time. Doing so may produce some temporary or permanent distortion/damage to screen. When cleaning the product and its components, unplug the power first and wipe it with a soft cloth.
- Page 10 SAFETY INSTRUCTIONS You may find different brightness and colour of the panel depending on your viewing position(left/right/top/down). This phenomenon occurs due to the characteristic of the panel. It is not related with the product performance, and it is not malfunction. Displaying a still image (e.g., broadcasting channel logo, on-screen menu, scene from a video game) for a prolonged time may cause damage to the screen, resulting in retention of the image, which is known as image sticking.
-
Page 11: Viewing 3D Imaging (Only 3D Models)
SAFETY INSTRUCTIONS Viewing 3D Imaging (Only 3D models) WARNING Viewing Environment Viewing Time - When watching 3D contents, take 5 - 15 minute breaks every hour. Viewing 3D contents for a long period of time may cause headache, dizziness, fatigue or eye strain. Those that have a photosensitive seizure or chronic illness Some users may experience a seizure or other abnormal symptoms when they are exposed to a flashing light or particular pattern from 3D contents. - Page 12 Cautions when using the 3D glasses Make sure to use LG 3D glasses. Otherwise, you may not be able to view 3D videos properly. Do not use 3D glasses instead of your normal glasses, sunglasses or protective goggles.
-
Page 13: Installation Procedure
INSTALLATION PROCEDURE / ASSEMBLING AND PREPARING NOTE Image shown may differ from your TV. Your TV’s OSD (On Screen Display) may differ slightly from that shown in this manual. The available menus and options may differ from the input source or product model that you are using. New features may be added to this TV in the future. - Page 14 ASSEMBLING AND PREPARING NOTE How to use the ferrite core (Depending on model) Use the ferrite core to reduce the electromagnetic interference in the LAN cable. Wind the LAN cable once on the ferrite core. Place the ferrite core close to the TV. [Cross Section of Ferrite Core] [to the TV] [to an External device]...
- Page 15 ASSEMBLING AND PREPARING Tag On Remote Control, Magic remote, batter- Owner’s manual Tag on Batteries (AAA) ies (AA) (Depending on model) (Depending on model) (Only UB85**, UB93**, The remote control will UB95**, UB98**, not be included for all UC97**) sales market. (See p.
- Page 16 ASSEMBLING AND PREPARING Stand Body / Stand Stand Screws Stand Screws Stand Screws Base 8EA, M4 x L20 4EA, M4 x L10 4EA, M6 x L47 (Only UC97**) (Only UB85**-ZA, (Only UB85**-ZD, (Only 65UB98**) (See p. 26, 27) UB93**, UB95**-ZA) UB95**-ZB, UC97**) (See p.24) 4EA, M4 x L20...
-
Page 17: Separate Purchase
Contact your dealer for buying these items. These devices only work with certain models. AG-F***DP AN-MR500 AN-VC5** AG-F*** Dual play glasses Cinema 3D glasses Magic Remote Video call camera LG Audio Device Tag on UB85**, UB95**, Compatibility UB93** UB98** UC97** AG-F***DP Dual play glasses AG-F***... -
Page 18: Parts And Buttons
Joystick Button Power Indicator Power Indicator D type : UB95**-ZB C type : UB93**, UB95**-ZA Screen Screen Speakers Speakers Remote control and Remote control and Intelligent sensors Intelligent sensors Joystick Button Joystick Button LG Logo light LG Logo light... - Page 19 Speakers Remote control and Remote control and Intelligent sensors Intelligent sensors Joystick Button Joystick Button LG Logo light LG Logo light G type : 98UB98** H type : UC97** Built-in camera Screen Screen Speakers Remote control and Remote control and...
-
Page 20: Using The Joystick Button
3 Joystick Button - This button is located below the TV screen. NOTE You can set the LG Logo Light or power indicator light to on or off by selecting General in the main menus. (Depending on model) Using the joystick button You can operate the TV by pressing the button or moving the joystick left, right, up, or down. -
Page 21: Lifting And Moving The Tv
ASSEMBLING AND PREPARING Lifting and moving the TV When transporting a large TV, there should be at least 2 people. When transporting the TV by hand, hold the TV as Please note the following advice to prevent the TV from shown in the following illustration. -
Page 22: Setting Up The Tv
ASSEMBLING AND PREPARING Setting up the TV Image shown may differ from your TV. Attaching the stand UB85**-ZA, UB93**, UB95**-ZA Stand Body (L) Stand Body (R) Stand Base 1 Attach the stand to the TV using the upper mounting hole on the back of the TV. 2 Attach the stand to the TV using the lower connection on the back of the TV. - Page 23 ASSEMBLING AND PREPARING UB85**-ZD, UB95**-ZB Stand Body (R) Stand Body (L) Stand Base 1 Attach the stand to the TV using the upper mounting hole on the back of the TV. 2 Attach the stand to the TV using the lower connection on the back of the TV.
- Page 24 ASSEMBLING AND PREPARING 65/79/84UB98** (Only 65/79UB98**) Wrench Stand Base M6 x L47 (Only 65UB98**) M6 x L52 (Only 79UB98**) (Only 84UB98**) Wrench M6 x L52 (Insulation Holder)
- Page 25 ASSEMBLING AND PREPARING 98UB98** CAUTION Make sure that the screws are inserted correctly and fastened securely. (If they are not fastened securely enough, the TV may tilt forward after Wrench being installed.) Mold M6 x L47 NOTE The stand screws are already attached at the back of the TV.
- Page 26 ASSEMBLING AND PREPARING UC97** Stand Body (L) Stand Body (R) Stand Base Stand Base M4 x L10 Wrench 1 When assembling the stand, lay the front screen protective package included in the product box on a table or flat surface and then place the TV screen face down on the protective package.
-
Page 27: Mounting On A Table
ASSEMBLING AND PREPARING Mounting on a table 1 Lift and tilt the TV into its upright position on a table. - Leave a 10 cm (minimum) space from the wall for proper ventilation. 10 cm 2 Connect the power cord to a wall outlet. M4 x L20 CAUTION Do not place the TV near or on sources of heat,... -
Page 28: Mounting On A Wall
TV to other building materials, please contact quali- LG recommends that wall mounting be performed by a We recommend the use of LG’s wall mount bracket. When you do not use LG’s wall mount bracket, please (Only 98UB98**) (Only 105UC9*) - Page 29 TV, insert the wall mount inner spacers into the TV wall mount holes to move your TV in vertical angle. Please make sure not to use the spacers for LG wall mounting bracket. (Only UC97**) CAUTION Disconnect the power first, and then move or Wall Mount install the TV.
-
Page 30: Tidying Cables
ASSEMBLING AND PREPARING Tidying cables (Only UC97**) Image shown may differ from your TV. 1 Gather and bind the cables with the Cable Holder and the Cable Management. 2 Fix the Cable Management firmly to the TV. (Only UB85**-ZA, UB93**, UB95**-ZA) Cable Holder Cable management Cable Holder... -
Page 31: Assembling The Av Cover
ASSEMBLING AND PREPARING 1 Gather and bind the cables with the Cable Holder. Assembling the AV cover (Only 65/79/84UB98**) (Only 98UB98**) 1 Insert the cover holder attached to the AV port cover into the hole of the main body of the product as illustrated. -
Page 32: Sliding Speaker
ASSEMBLING AND PREPARING Sliding Speaker CAUTION (Only 98UB98**) When the Sliding Speaker is operating (when the TV is turned on/off), ensure that children do not put their hands near the operating part of the speaker (at the bottom of the TV) and that they do not crawl into the space below the TV. -
Page 33: Using Built-In Camera
ASSEMBLING AND PREPARING Using Built-in Camera Preparing Built-in Camera (This feature is not available for all models.) (Only UB98**) 1 Pull up the slide at the back of the TV. You can make a Skype video call or use the motion recognition function using the built-in camera of the TV. -
Page 34: Name Of Parts Of Built-In Camera
ASSEMBLING AND PREPARING / MAKING CONNECTIONS MAKING CONNECTIONS 3 Push down the built-in camera when you are not using it. This section on MAKING CONNECTIONS mainly uses diagrams for the UB85** models. Connect various external devices to the TV and switch input modes to select an external device. -
Page 35: Antenna Connection
MAKING CONNECTIONS Antenna Connection Satellite dish Connection (Only satellite models) 13 / 18 V 700mA Max LNB IN Satellite (*Not Provided) ANTENNA / CABLE (*Not Provided) Wall Antenna Socket Satellite Dish Connect the TV to a wall antenna socket with an RF Connect the TV to a satellite dish to a satellite socket NOTE Use a signal splitter to use more than 2 TVs. -
Page 36: Hdmi Connection
MAKING CONNECTIONS HDMI Connection 1) HDMI specifications may be different for each input port, so make sure to check the device specifications before connecting. 2) The HDMI IN 3 port is especially suitable for the specifications to enjoy UHD Video (4:4:4, 4:2:2) of 4K @ 50/60 Hz. -
Page 37: Dvi To Hdmi Connection
MAKING CONNECTIONS DVI to HDMI Connection Component Connection COMPONENT VIDEO AUDIO YELLOW GREEN (Use the composite (Use the component gender cable provided.) gender cable provided.) (*Not Provided) (*Not Provided) (*Not Provided) AUDIO OUT DVI OUT DVD / Blu-Ray / HD Cable Box / PC / HD STB AUDIO VIDEO DVD / Blu-Ray... -
Page 38: Composite Connection
MAKING CONNECTIONS Composite Connection MHL Connection COMPONENT VIDEO AUDIO YELLOW (Use the composite gender MHL passive cable cable provided.) (*Not Provided) Mobile phone transmitting digital audiovisual signals from mobile (*Not Provided) phones to television sets. NOTE Connect the mobile phone to the HDMI(4K @ 60 Hz)/DVI IN 4(MHL) port to view the phone screen on the TV. -
Page 39: Audio Connection
MAKING CONNECTIONS Audio Connection Headphone Connection Ext.SPEAKER OPTICAL / H/P DIGITAL (*Not Provided) AUDIO (*Not Provided) Transmits the headphone signal from the TV to an external device. Connect the external device and the TV with the headphone as shown. NOTE AUDIO menu items are disabled when OPTICAL AUDIO IN connecting a headphone. -
Page 40: Usb Connection
MAKING CONNECTIONS USB Connection CI module Connection (*Not Provided) (*Not Provided) (*Not Provided) (*Not Provided) memory, external hard drive or a USB memory card reader to the TV and access the SmartShare menu to NOTE Some USB Hubs may not work. If a USB device View the encrypted (pay) services in digital TV mode. -
Page 41: Euro Scart Connection
MAKING CONNECTIONS Euro Scart Connection IN / OUT (RGB) (RGB) (Use the Scart gender cable provided - Depending on model) (*Not Provided) Transmits the video and audio signals from an external device to the TV set. Connect the external device and the TV set with the euro scart cable (or Scart gender cable) as shown. -
Page 42: Remote Control
REMOTE CONTROL REMOTE CONTROL The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully and use the TV correctly. To replace batteries, open the battery cover, replace batteries (1.5 V AAA) matching the ends to the label inside the compartment, and close the battery cover. - Page 43 REMOTE CONTROL (Depending on model) (POWER) Turns the TV on or off. TV/RAD Selects Radio, TV and DTV programme. INPUT Changes the input source. TV / SETTINGS Accesses the main menus. INPUT Q. MENU Accesses the quick menus. SETTINGS INFO SUBTITLE INFO Views the information of the current programme and screen.
-
Page 44: Magic Remote Functions
MAGIC REMOTE FUNCTIONS MAGIC REMOTE FUNCTIONS When the message “Magic Remote battery is low. Change the battery.” is displayed, replace the battery. To replace batteries, open the battery cover, replace batteries (1.5 V AA) matching ends to the label inside the compartment, and close the battery cover. Be sure to point the remote control toward the remote control sensor on the TV. -
Page 45: Registering Magic Remote
MAGIC REMOTE FUNCTIONS How to use Magic Remote Voice recognition Network connection is required to use the voice recognition function. Shake the Magic Remote slightly 1. Press the Voice recognition button. to the right and left or press 2. Speak when the voice display window appears (Home), buttons to on the left of the TV screen. -
Page 46: Precautions To Take When Using The Magic
MAGIC REMOTE FUNCTIONS Precautions to Take when Using the Magic Remote Use the Magic Remote within the maximum communication distance (10 m). Using the Magic Remote beyond this distance, or with an object obstructing it, may cause a communication failure. A communication failure may occur due to nearby devices. -
Page 47: Using The User Guide
USING THE USER GUIDE / MAINTENANCE MAINTENANCE USING THE USER GUIDE User Guide allows you to more easily access the detailed TV information. Cleaning your TV 1 Press the (Home) button to access the Home Clean your TV regularly to keep the best performance menu. -
Page 48: Troubleshooting
TROUBLESHOOTING / SPECIFICATIONS TROUBLESHOOTING Problem Solution Cannot control the TV with Check the remote control sensor on the product and try again. the remote control. Check if there is any obstacle between the product and the remote control. Check if the batteries are still working and properly installed No image display and no Check if the product is turned on. - Page 49 SPECIFICATIONS (Only UB98**) Standard IEEE 802.11a/b/g/n/ac 2400 to 2483.5 MHz Frequency Range 5150 to 5250 MHz 5725 to 5850 MHz (for Non EU) 802.11a: 14.5 dBm 802.11b: 16 dBm Output Power 802.11g: 13.5 dBm (Max.) 802.11n - 2.4GHz: 14 dBm 802.11n - 5GHz: 15.5 dBm 802.11ac - 5GHz : 16 dBm Because band channel used by the country could be different, the user can not change or adjust the...
- Page 50 SPECIFICATIONS 49UB85** MODELS 49UB850V-ZA 49UB850V-ZD With stand (mm) 1093 x 689 x 242 1093 x 681 x 237 Dimensions (W x H x D) Without stand (mm) 1093 x 646 x 38.2 1093 x 646 x 38.2 With stand (kg) 18.2 18.5 Weight...
- Page 51 SPECIFICATIONS 55UB95** MODELS 55UB950V-ZA 55UB950V-ZB With stand (mm) 1232 x 782 x 260 1232 x 780 x 242 Dimensions (W x H x D) Without stand (mm) 1232 x 734 x 37 1232 x 734 x 37 With stand (kg) 23.8 24.2 Weight...
- Page 52 SPECIFICATIONS 55UC97** 65UC97** MODELS 55UC970V-ZA 65UC970V-ZA With stand (mm) 1238.7 X 757.5 X 289.0 1456.9 X 888.0 X 316.4 Dimensions (W x H x D) Without stand (mm) 1238.7 X 730 X 72.1 1456.9 X 853.2 X 71.5 With stand (kg) 27.7 34.6 Weight...
- Page 56 Please contact LG First. If you have any inquiries or comments, please contact LG customer information centre. Customer Information Centre Country Country Service Service 0 810 144 131 0900 543 5454 015 200 255 800 187 40 0032 15 200255...