4-3-2.Starting The Adjustment Software - FujiFilm FinePix 2600Zoom Service Manual

4. Adjustment and Inspection

4-3-2.Starting the Adjustment Software

<Step 1>
Double-click on the executable file FFW217.exe.
--->Start-up screen of FFW(figure E) displays it.
<Step 2>
Select Operation -->Start to run (Fig.1-(1)-->Fig.1-(2)).
--->The[Start screen (Figure 2)] displays.
<Step 3>
Press the Enter key of PC after setting the camera to the
Jig mode.
--->The[Adjustment item select screen (Figure 3)]
displays.
* Method of setting Jig mode
1) Input 3.0+-0.1V from DC_IN.
2) Set the mode dial to [CAM] mode.
3) Connect the USB cable.
4) Open the lens barrier.
5) Put in LCD adjustment card.
6) Open the battery cover.
7) Please holding down the [Release] button,
them trun on the camera.
8) Press Enter key when the setting end.
* Adjustment item list
Adjustment item
LCD adjustment
CCD defect correction
Battery adjustment
Picture adjustment
AF adjustment
Flash adjustment
End setting
Revised:12.Sep.2001
20
Selection
Press the L key on the PC.
Press the C key on the PC.
Press the M key on the PC.
Press the P key on the PC.
Press the A key on the PC.
Press the F key on the PC.
Press the E key on the PC.
FinePix2600Zoom (U/E/EG) SERVICE GUIDE
(1) (2)
<Fig.1> FFW217.EXE Start-up Screen
<Fig.2> FinePix 2600Zoom PC Adjustment Soft-
ware Start Screen
<Fig.3> Adjustment Items Select Screen
fx2600z_ue