4-6.Installing The Jig Drivers On The Pc; 4-7.Installing And Starting The Adjustment Software - FujiFilm FinePix S3000 Service Manual

4-6.Installing the Jig Drivers on the PC

*As this device user a USB interface for communications with the PC,the[USB Jig Driver]must first be installed on the PC
before the PC adjustment software can be run.
*As the [USB Jig Driver] isthe same for all models sfter january 2001, this jig driver is already installed on the PC.
This driver software need not be installed on PC in which the USB device is already been adjusted.
<Step 1>
The setup software is downloaded from WEB, and software is installed in the PC.
We have uploaded the "DSC Jig Driver(ZJ00476-101)" on our website: (http://fujifilm-di.intranets.com/).
<Step2>
Double-click on [setup.exe](Fig.F) in the file, and follow the instructions on the screen to install the jig driver.
The jig driver will be saved in [C:\Program Files\Fig.F].

4-7.Installing and Starting the Adjustment Software

<Step 1>
The sdjustment software is downloaded from WEB, and software is installed in the PC.
We have uploaded the "PC Adjustment Software (ZJ00741-100.zip) for "FinePixS3000" on our website:
(http://fujifilm-di.intranets.com/).
<Step 2>
"ZJ00741-100.zip" is a compression of "ZIP type" file.
The "FinePix_S3000_W" folder can be done by extracting it by "Compression software".
Copy the "FinePix_S3000_W" folder to the "C:"drive on the Adjustment PC.(Fig.G).
<Step 3>
When all the folders have been copied to the C:drive, double-click on [C:\ FinePix_S3000_W \ FFW.exe](Fig.G) to start the
adjustment software.
[Note]
The adjustment software will not operate corrently unlessthe "FinePix_S3000_W" folder is located in the C:\ directory.
Do not change the directory configuration or folder name.
4.Adjustments
<Fig.F>
<Fig.G>
39