Remak DoorMaster C1 Installation And Operating Instructions Manual page 14

Accessory Installation
Figure 16 – Thermo-valve sensor installation, C1


 Rubber grommet (black)
 Sensor holder
+ 2.9x9.5 (2x) DIN 7971
+ 3.5x6.5 (2x) DIN 7971
(TVW-P accessory)
 Thermostat capillary tube
Figure 18 – TVW-R Thermostatic Valve Installation, D2 air curtain
Sensor
with capillary
(thermo-valve accessory)
Extension 3/4" 150mm,
external thread
(thermo-valve accessory)
14

G3/4" nut Heating
– low water
(thermo-valve accessory) inlet
Angle thermostatic valve 3/4" with
thermostatic regulator and separa-
te sensor
(thermo-valve accessory)
Figure 17 – Thermo-valve sensor installation, D2





 TVW-P (optional accessory)
 Thermostat sensor
 Thermostat capillary tube
 Sensor holder
+ 2.9x9.5 (2x) DIN 7971
+ 3.5x6.5 (2x) DIN 7971
(TVW-P accessory)
 Rubber grommet (part of the product)
 Internal longitudinal profile (part of the product)
 Air-venting valve (not included in the delivery)
Air-venting valve Heating
water
outlet
Extension 3/4" 65mm,
internal/external thread
(thermo-valve accessory)
Air curtains


G3/4" closing nut
(heat exchanger part)
Elbow 90° 3/4" (L 40mm),
double-ended thread
(thermo-valve accessory)