Overview; Abstract; Features - Fujitsu SK-91464A-100PMC User Manual

1 Overview

1.1 Abstract

The SK-91464A-100PMC is a multifunctional evaluation board for the Fujitsu 32-bit FR60
Flash microcontroller series MB91460.
It can be used stand-alone for software development and testing or as a simple target board
to work with the emulator system.
The board allows the designer immediately to start software development before his own
final target system is available.

1.2 Features

< Supports Fujitsu's MB91F464AA MCU in LQFP100 package or the MB2198 Emulator
System with the Probe Cable MB91464A-NLS-100PMC
< 9-12V unregulated external DC power supply
< 5V and 3.3V onboard voltage regulators
< Power-LEDs for all supply voltages
< Onboard voltage supervisor monitors both supply voltages
< In-Circuit serial Flash programming (UART4)
< All resources available for evaluation
< All MCU pins routed to edge connectors
< 4 MHz main crystal
< 32 kHz crystal for sub clock operation
< Two RS232, two LIN and one CAN interface are usable simultaneously
< 3V capable CAN, LIN and RS232 transceivers
< 8 User LEDs, optional: alphanumeric standard LC-Display connectable instead of LEDs
< Reset button, Reset LED
< 5 User buttons
< 96-pin VG connector featuring most MCU signals
< 96-pin VG connector featuring supply voltage (VCC) for external circuits
(max. output current: 50 mA)
This board must only be used for test applications
in an evaluation laboratory environment.
FMEMCU-UG-910025-15
SK-91464A-100PMC User Guide
Chapter 1 Overview
- 6 - © Fujitsu Microelectronics Europe GmbH