Nikon AF-S DX NIKKOR 35mm f/1.8G User Manual page 4

Thank you for purchasing the AF-S OX NIKKOR 35mm
fll.8G
lens. OX Nikkor lenses are specially designed for use
with Nikon digital-SLR (Nikon OX-format) cameras, such as the 0300 and 090. When mounted on Nikon OX-format
cameras, the lens picture angle is equivalent to approximately l.5x the focal length in 35mm format. Before using
this lens, please read these instructions and refer to your camera's User's Manual.
12
• Major features
• This lens employs a Silent Wave Motor to drive the
focusing mechanism, making autofocusing smooth,
silent and almost instantaneous. The focus mode
switch
®
is provided for simple selection of
autofocus (A) or manual focus (M) operation.
• More accurate exposure control is possible when this
is mounted on a Nikon camera with 3D color matrix
metering capability, because subject distance
information is transferred from the lens to the camera.
• Superior optical performance and rendering
characteristics are maximized with the use of one
asphericallens element. In addition, soft and pleasing
blur characteristics in portions of pictures that are
out-of focus are achieved by the rounded diaphragm.
• Up to two Wireless Remote Speedlight SB-R200s can
be mounted on the edge of the lens.
• Using the lens
Mounting the lens on the camera
IT]
Turn the camera off.
[I]
Remove the rear lens cap. (Fig. D)
[}] Align the mounting index
®
on the lens with the
mounting index on the camera, and rotate the lens
counterclockwise until it clicks into place. Be sure
that the lens is in the correct position when the
mounting index
®
is on the top of the lens.
[I]
Remove the front lens cap. (Fig. C)
Removing the lens from the camera
IT]
Turn the camera off.
[I]
Press and hold the lens release button on the
camera while turning the lens clockwise.