Advertisement
STUDIO CONDENSER MICROPHONES C-2
7. MICROPHONE INSTALLATION
To attach the microphones to the microphone stands, two clamps
are included with the delivery. First screw a clamp onto the stand
before attaching the microphone itself.
8. AUDIO CONNECTION
To connect the C-2 to your equipment, use a balanced XLR
microphone cable with the following pin assignment: Pin 1 = shielding,
pin 2 = +, pin 3 = -. Since all contact points of the C-2 are gold-plated,
your microphone cable too should feature gold-plated connectors, if
possible.
9. LEVEL SETTING / ADJUSTING THE BASIC SOUND
Adjust the gain control in the microphone channel of your mixing
console so that the peak LED lights up only occasionally or never
at all. The EQ controls in the microphone channel should be set to
mid-travel position to start with; low-cut filter and level attenuation
should be off. Try to achieve the desired sound by experimenting
with the microphone position. Often, it will be useful to set up
acoustic barriers (“baffles”) at various angles towards the signal
source. Only when the desired basic sound has been achieved,
should you start using equalizers and signal processors, if any at
all. Remember: less is often more!
10. ONLINE-REGISTRATION
Please do remember to register your new BEHRINGER equipment
right after your purchase by visiting www.behringer.com
(alternatively www.behringer.de) and kindly read the terms and
conditions of our warranty carefully.
BEHRINGER warrants all items purchased against defects in
material or workmanship for one year* from date of purchase. Full
terms of the warranty may be found on our website at
www.behringer.com (alternatively www.behringer.de).
Should your BEHRINGER product malfunction, our goal is to have
it repaired as quickly as possible. To arrange for warranty service,
please contact the retailer from whom the equipment was
purchased. Should your BEHRINGER dealer not be located in
your vicinity, you may directly contact one of our subsidiaries.
Corresponding contact information is included in the original
equipment packaging (Global Contact Information/European
Contact Information). Should your country not be listed, please
contact the distributor nearest you. A list of distributors can be
found in the support area of our website (www.behringer.com/
support).
4
10. ONLINE-REGISTRATION
Advertisement
