Download Print this page

Safety Precautions; 3. Power Supply - Behringer C-2 User Manual

Studio condenser microphones

Advertisement

STUDIO CONDENSER MICROPHONES C-2

1. SAFETY PRECAUTIONS

Detailed safety precautions:
Please read all safety precautions and operating instructions before
attempting to operate the unit. Keep all safety precautions and
operating instructions for future reference.
Water and moisture:
Condenser microphones are extremely moisture-sensitive. Never
use your microphone in close proximity to water (e.g. bath tubs,
wash basins, sinks, washing machines, pools, etc.). When doing
voice recordings, always use the enclosed windscreen to safely
protect the capsule from moisture.
Power supply:
Always use the power supply specified in the operating instructions.
Damage:
Take care not to drop your microphone as this can lead to severe
damage. BEHRINGER assumes no liability for any damage caused
by the user.
Service and care:
After each use, remove the microphone from its mount and wipe it
down with a soft cloth and place it back into its protective casing
(included with the microphone). Then, lay the small bag containing
the moisture-absorbing crystals on top of the microphone head.
2. INTRODUCTION
Congratulations! By purchasing the BEHRINGER C-2, you have
obtained 2 condenser microphones that offer the highest quality
standards and the best audio characteristics.
Both microphones have been matched to one another (matched
pair), and are therefore particularly well-suited for stereo recordings.
Of course, you can also use the microphones individually.
Their outstanding characteristics make these microphones a
valuable tool in the studio and on the stage.

3. POWER SUPPLY

Phantom power (+48 V) is required to operate your microphone.
We assume no liability for damage caused to your C-2 through
deffective phantom power. Before activating phantom power, mute
your playback system and connect the C-2 to the microphone input
of your mixing console. After activating phantom power, the C-2
requires several seconds to stabilize itself.
2
3. POWER SUPPLY

Advertisement

loading