Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Behringer C-2
Summary of Contents for Behringer C-2
- Page 1 User’s Manual Version 1.0 April 2005...
- Page 2 3. POWER SUPPLY Phantom power (+48 V) is required to operate your microphone. We assume no liability for damage caused to your C-2 through deffective phantom power. Before activating phantom power, mute your playback system and connect the C-2 to the microphone input of your mixing console.
- Page 3 6. LOW CUT-FILTER AND LEVEL ATTENUATION (-10 dB) The C-2 studio microphones feature a switchable low-cut filter that lets you eliminate low-frequency disturbances such as subsonic noise. Set the switch to its middle position to activate the low-cut filter.
- Page 4 To connect the C-2 to your equipment, use a balanced XLR microphone cable with the following pin assignment: Pin 1 = shielding, pin 2 = +, pin 3 = -. Since all contact points of the C-2 are gold-plated, your microphone cable too should feature gold-plated connectors, if possible.
- Page 5 Thank you for your cooperation! *Customers in the European Union may have a different term, as such, please contact BEHRINGER Germany Support for further details. 11. SPECIFICATIONS Transducer type: true condenser, 16 mm (0.63") single diaphragm...
-
Page 6: Polar Pattern
Polar pattern Frequency response BEHRINGER is constantly striving to maintain the highest professional standards. As a result of these efforts, modifications may be made from time to time to existing products without prior notice. Specifications and appearance may differ from those listed or illustrated.
Need help?
Do you have a question about the C-2 and is the answer not in the manual?
Questions and answers