CDA sk380 Series Manual page 20

Multifunction oven
Table of Contents

Advertisement

Replacing the Halogen Oven Lights
WARNING: Ensure the appliance is switched off before replacing the lamp to avoid the possibility of
electric shock.
- Allow the oven cavity and the heating elements to cool down;
- Switch off the electrical supply;
- Remove the protective cover C (fig. 7);
- Replace the halogen lamp B with a new one suitable for high temperatures having the following specifications:
230V and same power (check watt power as stamped in the lamp itself) of the replaced lamp.
IMPORTANT WARNING: Never replace the bulb with bare hands; contamination from your fingers
can cause premature failure.
Always use a clean cloth or gloves.
- Refit the protective cover;
Note: Oven bulb replacement is not covered by your guarantee.
20
C
B
Fig. 7
WRONG
CORRECT
C
B

Advertisement

Table of Contents
loading

Table of Contents