CMA Dishmachines Espresso Coffee Machine Use And Maintenance Manual page 13

A R ION
D
• put the coffee cup under the dispensing spout;
• press the desired dose key wait for dispensing to finish ( D comes on);
• to stop coffee delivery in advance, press the delivery key again or press the ST P key;
• if the push button panel malfunctions or is locked, use the manual switch.
• Place the programming lever
right-hand panel of the body;
• put the coffee cup under the dispensing spout.
• press the PR ST P key
• press the desired dose key
• when the desired dose has been attained, confirm by pressing the PR
• Repeat this operation for the other dose keys.
• upon completion of programming, place the programming lever
position.
PROG.
In some models, the programming lever has been eliminated because to access program, and it is enough to press the PR
at least seconds with all push button panel
key or the selected dose key.
In other models (for example
To exit programming it is sufficient to wait a few seconds.
NOT
The programming of every dose must be done with ground coffee and not with previously used grounds.
With machines having two or three groups, by fi rst programming the right-hand push buttons the others are automatically
programmed. It is however both possible and advisable to program the push button panels independently, always starting
from the right-hand push button panel.
in the position. It is located under the front
and all dose key D will come on;
;
STOP
D coming on. Also, confirmation of the dose can be given by pressing either the PR
RIA), to access programming it is necessary to use a special key switch.
espresso coffee machine - instructions for the user
ST P key ;
back in the FF
PROG.
STOP
ST P key for
ST P
english -