Table of Contents
Advertisement
This setting can be used when the TV set is an old model that can not
support 1080P.
Note5: The matrix will use the embedded 1080P-5.1 EDID when the DIP
switch is in this mode. The EDID will be 1080P video and 5.1 audio.
Note6: The matrix will use the embedded 1080P-7.1 EDID when the DIP
switch is in this mode. The EDID will be 1080P video and 7.1 audio.
Note7: When mix or copy function failed, the LEDs will lit for about 2
seconds. When mix or copy function no error occurred, The LEDs will
flicker for three times.
Note8: All settings will be effective only after repower.
Examples for EDID setting:
A. How to reset EDID to factory default setting?
Because the default EDID is 1080P stereo. So just set DIP to '010' and
power on the matrix, all the EDID for input ports will be set to 1080P
stereo. After reset the EDID data, the DIP switches can be set to '000' or
'001' if user need future settings.
B. How to copy the EDID of AVR which is 7.1 audio to a input port?
1. Set DIP to '001'.
2. Connect the AVR to one of the output port (For example, output 1).
3. Power on the matrix. Select the source of the AVR (for example input
2) to input port (For example, intput 2) which is connected to a BD
player.
4. Press and hold the output1 key more than 3 seconds, the matrix will
copy the EDID data from output 1 to input 2.
10 |
P a g e
Advertisement
Table of Contents
