Table of Contents
Advertisement
6. DIP switch for EDID setting. (Factory default setting: DIP in '000' mode,
EDID are all 1080P stereo).
Position1
Position2
0
0
0
0
1
1
Note1: The matrix will mix the EDID data of all HDMI sinks that choose
the same source. And forward this mixed EDID to the HDMI source device.
The thought of EDID mixing is to enable all the connected sink device can
have video and audio they can display or output. For example, One TV is
1080P, stereo, another is 1080i, 5.1 audio. The mixed EDID will be 1080i,
stereo audio. (Press and hold output1 and output2 button simultaneously
for 3 seconds to trigger this function)
Note2: Copy operation is carried out under the appropriate trigger buttons.
When output-2 select input-1, press and hold output2 for 3 seconds, the
matrix will copy the output-2's edid to input-1.
Note3: The matrix will use the embedded 1080P-stereo EDID when the
DIP switch is in this mode. The EDID will be 1080P video and stereo
audio.
Note4: The matrix will use the embedded 1080i-stereo EDID when the
DIP switch is in this mode. The EDID will be 1080i video and stereo audio.
Position3
0
0
0
1
1
0
1
1
0
0
0
1
Function
Enable EDID manual mix, mix result is
compatible with all HDMI sinks that choose
the same source (Note1)
Enable EDID manual copy (Note2)
1080P stereo (Using Embedded EDID)
(Note3)
1080i stereo
(Using
(Note4)
1080P 5.1 (Using Embedded EDID) (Note5)
1080P 7.1(Using Embedded EDID) (Note6)
Embedded
EDID)
9 |
P a g e
Advertisement
Table of Contents
