Iqinvision IQeye Sentinel Series Installation And Operating Instructions Manual page 10

5. If mounting the unit outdoors, please take necessary and thorough
measures to ensure the camera unit is properly sealed from inclement
weather. An example would be to use silicone sealer around the back of
the base, being sure to surround all holes with a generous bead of sealant
to the outer edge of back box surface. You should use a sealing method
you are familiar with and which conforms to any local, state, county and
country requirements and laws.
BLINK PATTERNS
Your IQeye Sentinel all-weather megapixel camera is equipped with two status
indicator LEDs that can be seen on the back of the Sentinel enclosure. During
normal operation, the following colors and patterns should be visible
Status
Connected to the network
but no network activity
Connected to the network
with network activity
Connected but no power
If your Sentinel camera fails to power up or indicate a network connection or
show activity, please contact IQinVision technical support for assistance.
Left LED
Solid Yellow (10 base)
Solid Green (100 base)
Intermittently blinking
between red/green
as activity occurs
Dark
10
Right LED
Green 2-second
blinking pattern
Intermittently blinking
between red/green as
activity occurs
Dark
Figure 11