Operating Mode - Vizio L37 Service Manual

Mode Register Operation

Operating Mode

The normal operating mode is selected by issuing a Mode Register Set Command with bits A7-A12 to
zero, and bits A0-A6 set to the desired values. A DLL reset is initiated by issuing a Mode Register Set
command with bits A7 and A9-A12 each set to zero, bit A8 set to one, and bits A0-A6 set to the desired
values. A Mode Register Set command issued to reset the DLL should always be followed by a Mode
Register Set command to select normal operating mode.
All other combinations of values for A7-A12 are reserved for future use and/or test modes. Test modes
and reserved states should not be used as unknown operation or incompatibility with future versions
may result.
CONFIDENTIAL – DO NOT COPY Page 8-41
File No. SG-0176