Vizio L37 Service Manual page 84

Data for any Write burst may be concatenated with or truncated with a subsequent Write command. In
either case, a continuous flow of input data can be maintained. The new Write command can be
issued on any positive edge of clock following the previous Write command. The first data element
from the new burst is applied after either the last element of a completed burst or the last desired data
element of a longer burst which is being truncated. The new Write command should be issued x cycles
after the first Write command, where x equals the number of desired data element pairs (pairs are
required by the 2n prefetch architecture).
Write Command
CONFIDENTIAL – DO NOT COPY Page 8-48
File No. SG-0176