Page 2
Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited. DTS, the Symbol, & DTS and the Symbol together are registered trademarks, and DTS Studio Sound is a trademark of DTS, Inc.
Page 3
Your TV is designed and manufactured to operate within defined design limits. Misuse may result in electric shock or fire. To prevent To get the most out of your new VIZIO product, read these your TV from being damaged, the following instructions should...
Page 4
or table specified by the manufacturer, or sold • Do not apply pressure or throw objects at your TV. with the apparatus. When a cart is used, use This may compromise the integrity of the display. The caution when moving the cart/apparatus manufacturer’s warranty does not cover user abuse or combination to avoid injury from tip-over.
Page 5
Continuous use in this case may result in fire or electric • This apparatus shall not be exposed to dripping or shock. splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus. • Do not use your TV if any abnormality occurs. If any smoke or odor becomes apparent, unplug the power •...
TELEVISION ANTENNA CONNECTION Lightning Protection PROTECTION For added protection of the TV during a lightning storm or when it is left unattended or unused for long periods of time, unplug the TV from the wall outlet and disconnect the antenna or cable If an outside antenna/satellite dish or cable system is to be system.
Table of Contents Installing the TV ..........3 Creating a Custom Picture Mode ........28 Locking and Unlocking the Custom Picture Modes ..29 Inspecting the Package Contents ....3 Deleting a Custom Picture Mode ........29 Installing the TV .
Page 8
Changing the Parental Control Passcode .....43 Resetting the Content Locks ...........43 Setting up View Mode.............44 Changing the Wide Setting ..........44 Adjusting the CEC Settings ..........45 Turning the Power Indicator On or Off ......45 Using the Reset & Admin Menu ....46 Restoring the TV to Factory Default Settings ....46 Using the Guided Setup Menu .
It is placed on an uneven, unstable, or non-level surface • It is pushed, pulled, or otherwise improperly moved • If an earthquake occurs and the TV is not properly secured. VIZIO LED HDTV Remote control with batteries Quick Start Guide TV stands Power cord...
INSTALLING THE STAND It is recommended that two people take part in the stand installation. Remove any plastic wrapping from the TV and the stand. Place the TV screen-down on a clean, flat surface. To prevent scratches or damage to the screen, place the TV on a soft surface such as a blanket and avoid any sharp edges.
Page 11
INSTALLING THE STAND Insert the left and right stands into the base of the TV. Insert two (2) T3 30 mm Phillips screws (included) into the back of the TV and tighten them using a Phillips screwdriver, to secure each stand to the TV. When you are finished, place the TV on a stable, level surface.
TV model: Installing a TV on a wall requires lifting. To prevent injury or damage to the TV, ask someone to help you. D39h-C0 Screw Size: Hole Pattern: 100 mm (V) x 100 mm (H) Weight w/o 13.45 lbs...
Controls and Connections USB - Connect USB thumb drive to play photo, music, or video. HDMI - Connect HDMI device. Optical Audio Out - Connect optical/SPDIF audio device, such as home audio receiver. Stereo Audio Out - Connect RCA audio device, such as sound bar. Coaxial - Connect coaxial cable from cable, satellite, or antenna.
Controls and Connections Note: The image shown here is for illustrative purposes only and may be subject to change. The actual number of ports and their locations may vary, depending on the model. Power - Press once to turn on the TV. Press and hold to turn off the TV Input - Press once to access the INPUT menu.
FRONT PANEL REMOTE SENSOR & POWER INDICATOR When using the remote, aim it directly at this sensor. The power indicator flashes on when the TV turns on, then goes out after several seconds. To keep the power indicator on as long as the TV is on, see Turning the Power Indicator On or Off on page 45 .
USING THE REMOTE INPUT POWER Change the currently-displayed input. Turn the TV on or off. A/V CONTROLS INFO Control USB media player. Display the info window. CLOSED CAPTIONS MENU Open the closed caption menu. Display the on-screen menu. EXIT ARROW Close the on-screen menu.
Replacing the Batteries 1. Remove the battery cover. 2. Insert two batteries into the remote control. Make sure that the (+) and (-) symbols on the batteries match the (+) and (-) symbols inside the battery compartment. 3. Replace the battery cover.
Connecting Your Devices CONNECTING A DEVICE Your TV can be used to display output from most devices. 1. Verify that your device has a video port that matches an available port on the TV (HDMI, Component, etc.). Cable/Satellite Box 2. Turn the TV and your device off. 3.
CONNECTING A DEVICE - AUDIO AND VIDEO CABLE TYPES AV CABLE COAXIAL CABLE AV cables (or composite cables) are the traditional Coaxial cables are the traditional way of connecting way of connecting your devices to your TV. Video antennas and cable television signals to your TV. signals are sent over the yellow connector while audio Coaxial cables carry both audio and video signals is sent over the red and white connectors.
Page 20
COMPONENT CABLE HDMI CABLE Component cables are designed to carry high HDMI is the intelligent, all-digital interface that delivers definition video signals along with additional both dazzling quality and unmatched ease of use. HDMI audio connections. Colors are delivered with color technology transmits crystal-clear digital video along information split up three different ways over three with multi-channel surround audio.
TV (optical, RCA, etc.). 2. Turn the TV and your audio device off. 3. Connect the appropriate cable (not included) to the TV and the device. VIZIO Sound Bar 4. Turn the TV and your device on. HDMI CABLE • CEC 2-WAY COMMUNICATION BEST •...
CONNECTING AN AUDIO DEVICE - AUDIO CABLE TYPES RCA CABLE OPTICAL/SPDIF CABLE HDMI CABLE AV cables (or composite cables) are the Optical/SPDIF cables transmit audio signals as HDMI technology transmits crystal-clear digital traditional way of connecting your devices to pulses of light through a cable made of plastic multi-channel surround audio through a single your audio device.
CONNECTING AN AUDIO DEVICE - ARC Without HDMI ARC With HDMI ARC Built-in Tuner Built-in Tuner Your TV Your TV With an HDMI ARC setup, the audio connection between Without an HDMI ARC setup, your TV and home audio your TV will transmit audio receiver can be removed.
Seleccione "Home Use" por Modo de Casa o "Store Demo" por Demostración de Tienda. Choisissez "Home Use" pour Mode Domicile ou "Store Demo" pour Démonstration de Magasin. 6. When you are finished, the message “Your VIZIO TV is set up” Choisissez "Home Use" pour Mode Domicile ou "Store Demo" pour Démonstration de Magasin.
Use the Arrow buttons to highlight • Adjust the Picture settings a menu option, and press the OK button to select that option. • Adjust the Audio settings VIZIO • Set the Sleep Timer TV SETTINGS Wide Zoom Normal Panoramic •...
CHANGING THE INPUT SOURCE CHANGING THE SCREEN ASPECT RATIO External devices such as DVD players, Blu-ray Players, and The TV can display images in five different modes: Normal, Stretch, video game consoles can be connected to your TV. To use one Panoramic, Wide, and Zoom.
VIZIO Wide Zoom Normal Panoramic VIEWING VIDEO WITH THE MENU OPEN When the on-screen menu opens, it covers the left-hand portion VIZIO of the picture. The picture can be displayed in three different Exit Wide Zoom Normal Panoramic PICTURE ways:...
1. Press the MENU button on the • Brightness - Adjusts the black level of the picture. When VIZIO remote. The on-screen menu is this setting is too low, the picture may be too dark to PICTURE displayed.
Select Off, or On. This option is not available for 1. From the PICTURE menu, use devices connected using a coaxial cable. VIZIO the Arrow buttons to highlight • Picture Size & Position - Picture Size increases or More Picture, and then press...
Adjusting the Picture Mode Edit Settings To adjust the Picture Mode Edit settings: 1. From the PICTURE menu, use VIZIO the Arrow buttons to highlight PICTURE MODE EDIT More Picture > Picture Mode Wide Zoom Normal Panoramic Save Picture Mode...
2. Use the Arrow buttons to highlight Color Tuner, and press the To adjust the color calibra picture settings: OK button. The Color Tuner menu is displayed. 1. From the PICTURE menu, VIZIO use the Arrow buttons to Color Tuner COLOR CALIBRATION...
Page 32
To turn color channels off and on: To adjust the 11 Point White Balance settings: 1. From the PICTURE menu, use the Arrow buttons to highlight 1. From the Color Tuner menu, use the Arrow buttons to Color Calibration and press the OK button. The COLOR highlight Color Tuner, and then press the Left/Right Arrow CALIBRATION menu is displayed.
Page 33
To show or hide the Color Bar Test Pattern: To show or hide the Flat Test Pattern: 1. Ensure that you are on an input that is displaying active 1. Ensure that you are on an input that is displaying active content.
Left/Right Arrow buttons to select the color for the ramp To create a custom picture mode: test pattern. Selecting a color immediately shows that color ramp. 1. Set the Picture Mode to an VIZIO existing custom setting. See —or— SAVE PICTURE MODE Adjusting the Picture Settings on page 22.
To lock all custom picture modes: Inputs assigned to a deleted custom picture mode VIZIO become assigned to the Calibrated picture mode. 1. From the PICTURE menu, use LOCK PICTURE MODE the Arrow buttons to highlight...
To adjust the audio settings: Variable to control the headphones’ volume from 1. Press the MENU button on the the TV’s volume controls, or select Fixed to control VIZIO remote. The on-screen menu the headphones’ volume from your home theater AUDIO is displayed.
Changing the Equalizer Settings Deleting the Custom Audio Mode The graphic equalizer has several pre-set modes and allows you To delete the custom audio mode that has been created: to create one custom mode. 1. Press the MENU button on the remote. The on-screen menu is To select a pre-set audio mode: displayed.
Auto Power Off. 1. Press the MENU button on the 2. Use the Left/Right Arrow buttons on the remote to change VIZIO remote. The on-screen menu is whether the TV will turn off. If you don’t want the TV to turn TIMERS displayed.
You can use the TV’s Channels menu to: to highlight TV (antenna icon), then press OK. • Select a Channel Source 2. Press the MENU button, select Channels and press OK. The VIZIO • Find channels CHANNELS menu is displayed. CHANNELS •...
To add a single new analog channel: Occasionally, you may need to add a new range of channels or 1. From the CHANNELS menu, VIZIO add a new analog channel. You can do this by using the Partial highlight Add Analog Channel Channel Scan and Add Analog Channel options.
See Locking and Unlocking Channels on page 42 . To remove a channel: 1. From the CHANNELS menu, VIZIO highlight Skip Channel, and press OK. The SKIP CHANNEL SKIP CHANNEL menu is displayed.
Not all programs are broadcast in SAP. The Analog Audio Language feature only works when the program being viewed is being broadcast with 1. From the CHANNELS menu, VIZIO Secondary Audio Programming. highlight Digital Language and press OK. The DIGITAL DIGITAL LANGUAGE LANGUAGE menu is displayed.
To change the appearance of digital closed captions: If the program you are viewing is not being broadcast 1. From the CLOSED CAPTIONS with closed captions, the TV will not display them. VIZIO menu, use the Arrow buttons to highlight Digital Style and DIGITAL STYLE press OK.
Page 44
• Text Edges Color - Change the color of the text edge Typical choices include: effects. • Opaque background, transparent window—Only a strip • Background Color - Change the color of the of background appears behind the text, expanding as background directly behind the text.
DVD player connected to the Component input, you can rename that input to display “DVD Player.” To change the name of an input: VIZIO 1. Press the MENU button on the remote. The on-screen menu is NAME INPUT Input Name displayed.
CHANGING THE TV SETTINGS Viewing System Information To view a summary of the TV settings: Using the System menu, you can: 1. Press the MENU button on the remote. The on-screen menu is VIZIO • View system information displayed. SYSTEM •...
To ensure the correct time is displayed when you press the INFO button, set the TV’s time zone: To change the on-screen menu language: 1. Press the MENU button on the 1. Press the MENU button on the VIZIO remote. The on-screen menu is VIZIO remote. The on-screen menu is displayed.
Using the Parental Controls Enabling or Disabling Program Ratings The TV’s parental controls allow you to prevent the TV from To manage program content according to its rating, you must displaying certain channels or programs without a password. enable the Program Rating feature. The Parental Controls menu only appears when: To enable or disable the Program Rating feature: •...
Blocking and Unblocking Content by Rating Changing the Parental Control Passcode A channel may sometimes broadcast programs that are meant If you use the parental controls, you should change the passcode for children, and at other times broadcast programs that are to prevent children from accessing inappropriate material.
To change the on-screen menu language: 1. Press the MENU button on the remote. The on-screen menu is displayed. 1. Press the MENU button on the VIZIO 2. Use the Arrow buttons on the remote to highlight System remote. The on-screen menu is displayed.
Adjusting the CEC Settings Turning the Power Indicator On or Off The California Energy Commission (CEC) function on your The Power Indicator on the front of your TV normally does not TV enables you to control HDMI-connected devices with the glow when the TV is on.
All of the on-screen menu settings can be reset to the factory To use guided setup: default settings. 1. Press the MENU button on the VIZIO remote. The on-screen menu is If you restore the TV to the factory default settings, all displayed.
USING THE INFO WINDOW The Info Window can be displayed by pressing the INFO or GUIDE button on the remote: • Press the INFO or GUIDE button one time to display channel, input, and display information. • Press the INFO or GUIDE button two times to display the program title, program rating, audio information, and the start and end times of the program.
Using the USB Media Player USING THE USB MEDIA PLAYER Playing USB Media To play your USB media: The USB Media Player allows you to connect a USB thumb drive to 1. Connect your USB thumb drive to the USB port on the side of your TV and play music, video, or photos.
Page 55
OK to return browse files and folders to the previous screen. Current Folder using the Arrow and OK Displays the folder path. buttons on the remote. Connected Sources VIZIO Displays Photo VIZIO_2GB\Photo\root connected USB USB1: devices. Current Folder root A.jpg...
Page 56
Troubleshooting & Technical Support Do you have questions? Find answers here: SUPPORT.VIZIO.COM Find help with: •New product setup •Connecting your devices •Technical problems •Product updates and more. Live chat support available You can also contact our award-winning support team: Phone:...
Page 57
The TV displays “No Signal.” There is no sound. • Press the INPUT button on the remote control to select a • Press VOLUME UP on the remote control. different input source. Press the MUTE button on the remote to ensure mute is •...
Page 58
The buttons on the remote aren’t working. The TV has pixels (dots) that are always dark or always lit. • The Red and Yellow hot key buttons below the V button • Your HDTV is precision-manufactured using an extremely do not operate with this model. high level of technology.
Specifications D39h-C0 Screen Size: 39" Class Viewable Area: 38.50" Dimensions w/ Stand: 34.75" x 22.68" x 8.27" w/o Stand: 34.75" x 20.51" x 2.91" Weight w/ Stand: 14.11 lbs w/o Stand: 13.45 lbs TV Type: Full Array LED Refresh Rate:...
Page 60
D39h-C0 Remote Control Model: XRT010 CSA-US, BETS-7/ICES-003, FCC Class B, Certifications: HDMI (CEC, ARC), Dolby Digital Energy Star 6.1 Compliance: COUNEE NRCan Voltage Range: 120V @ 60 Hz Power-On Consumption: 36 W Standby Power Consumption: 0.2 W...
PRE-AUTHORIZATION MUST BE OBTAINED BEFORE SENDING ANY PRODUCT PURCHASE PRICE OF THE PRODUCT. VIZIO SHALL NOT BE RESPONSIBLE FOR TO A VIZIO SERVICE CENTER. Proof of purchase in the form of a purchase LOSS OF USE, LOSS OF INFORMATION OR DATA, COMMERCIAL LOSS, LOST...
Legal & Compliance FCC Class B Radio Interference Statement NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.