30
Surround Panels
SURROUND PANEL SIZE
8"
10"
Installation Instructions
1.
With the insert 12" from the fireplace, install the side surround panels (see the directions below).
ANSWER ONLY:
Remove and discard the
button plugs from both sides
of the insert.
2. Adjust the position of the side panels so they are: 1) flush with the bottom of the insert; 2) both the
same distance back from the front of the insert; 3) perpendicular to the floor (use the top panel, if
necessary, to judge alignment). Tighten the screws that hold the side panels in place.
© Travis Industries
Optional Equipment
HEIGHT
28-1/4"
30-1/4"
100-01233_000
WIDTH
40-1/8"
44-1/8"
HINT:
Pre-thread the holes on the
insert with the screws.
Attach the side surround
panels with the included
screws.
4090819