System Operation - Fujitsu AUT36A Operating Manual

SYSTEM OPERATION

<Control Several Units with just one Remote Controller>
One remote controller can control up to 16 air conditioners.
All the air conditioners can be operated with the same set-
ting.
To Use the ZONE CONTROL
When the ZONE control button is pressed while multiple air conditioners
are being centralized controlled, only the preset air conditioners stop.
Press the ZONE control button.
Preset units will stop.
The ZONE lamp (green) will light.
To Stop the ZONE CONTROL
Press the ZONE control button one more time.
Those units that were stopped will start again.
The ZONE lamp will go out.
Outdoor
unit
Indoor unit
Remote
Unit No.1
controller
Unit No.2 Unit No.16
NON STOP CLOCK TEMP AUTO
°C
HIGH
1 2
TIMER SET TIME TEMP./DAY FAN
MODE CONTROL
CLOCK ADJUST
ZONE ENERGY SAVE
SET DAY OFF
AUTO
COOL
DEFROST TEST
MASTER
CONTROL
START/STOP
17