Service Tools - Motorola GTX/LCS 2000 Service Manual

Service Tools

PART No.
0180381B45 110 VAC
or
0180300E06 220 VAC
8180369E97
1105139W02
0180386A81
0180386A78
0180386A82
6684253C72
6680384A98
1010041A86
R-1070A
(superseded by R1319A)
R1319A
(supersedes R-1070A)
6680332E82
6680332E83
6680332E84
6680333E28
The following table lists the tools recommended for working on the radio; these
are also available from Motorola. Note that the R-1070A workstation requires the
use of a specific "heat focus head" for each of the components on which this item
is used. Each of these heat focus heads must be ordered separately.
Table 3-3 Service Tools
DESCRIPTION
MBT250 Surface-mount/
through-hole repair
station
Flux holder/applicator
30cc plastic syringe and flux
paste
Miniature digital read-out
soldering station (includes
1/64" micropoint tip)
Illuminated magnifying
glass with lens attachment
Anti-static grounding kit
Straight prober
Brush
Solder (RMA type),
63/37, 0.020" diameter, 1 lb.
spool
Shields and surface-
mounted component - IC
removal/rework station
Surface-Mounted Device
Rework Station
R1319A Reflow Nozzle
R1319A Reflow Nozzle
R1319A Reflow Nozzle
R1319A Reflow Nozzle
APPLICATION
Temperature-controlled, self-contained soldering/
desoldering repair station for installation and
removal of surface-mounted devices.
Allows for the proper amount of flux to be applied
to pad grid arrays for repair.
For use with flux holder/applicator 8180369E97.
Used during all radio assembly and disassembly
procedures
Removal of surface-mounted integrated circuits
Removal of surface-mounted integrated circuits
For IC removal (approximate size 0.8 in. x 0.8 in.)
For IC removal (approximate size 0.6 in. x 0.6 in.)
For IC removal (approximate size 0.5 in. x 0.5 in.)
For removal of RF PA
Test Equipment, Service Aids, and Tools 3-3