Oce OP30C Operation Manual page 49

2-6 System Setting
Network
• Host Name
• IP Address
• Subnet Mask
• Default Gateway
• DHCP/BOOTP
• RARP
• DNS Server (Pri.)
Register the host name of the scanner (up to 32 single-byte characters) in this field.
Register the IP address of the Scanner Interface Card in this field in the following form:
XXX.XXX.XXX.XXX
Register the subnet mask of the Scanner Interface Card in this field in the following form:
XXX.XXX.XXX.XXX
Register the default gateway of the Scanner Interface Card in this field in the following form:
XXX.XXX.XXX.XXX
The DHCP and BOOTP can be set to either "DISABLE" or "ENABLE". The factory default setting is
"ENABLE".
The RARP can be set to either "DISABLE" or "ENABLE". The factory default setting is "ENABLE".
When a Host Name is used for transmitting data under an environment that uses a DNS server, register
the IP address of the primary DNS server in this field in the following form: XXX.XXX.XXX.XXX
Page 2-13