Top Cover - HP Pavilion dm1 Maintenance And Service Manual

Top cover

Description
Top cover (includes TouchPad board and cable)
Before removing the top cover, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the hard drive cover (see
6. Remove the hard drive (see
7. Remove the keyboard (see
Remove the top cover.
1. Position the computer upside down on a flat surface, with the front toward you.
2. Use a thin, flat tool to release the 4 rubber feet.
3. Remove the 2 PM2.0×9.0 screws (1) and the 3 PM2.0×5.0 screws (2) (located under the rubber
device feet) that secure the top cover to the base enclosure.
4. Position the computer right-side up, with the front toward you and the display open as far as
possible.
50 Chapter 4 Removal and replacement procedures
Battery on page 36).
WLAN module on page
Drives on page 44).
Keyboard on page 47).
Spare part number
608643-001
38).