Display Assembly - HP Pavilion dm1 Maintenance And Service Manual

Display assembly

Description
29.5-cm (11.6-in) (1366 × 768) HD BrightView LED display assembly (includes webcam,
microphone, nameplate, and logo)
Before removing the display assembly, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the hard drive cover (see
6. Remove the hard drive (see
7. Disconnect the wireless antenna cables from the WLAN module (see
and WWAN module (see
8. Remove the keyboard (see
9. Remove the top cover (see
Remove the display assembly:
1. Position the computer display-side up, with the front toward you.
2. Open the computer as far as possible.
3. Disconnect the display panel/webcam/microphone cable (1) from the system board.
58 Chapter 4 Removal and replacement procedures
Battery on page 36).
WLAN module on page
Drives on page 44).
WWAN module on page
Keyboard on page 47).
Top cover on page 50).
38).
WLAN module on page
40).
Spare part number
608631-001
38)