Setting The Reverse Mode; Resetting The Tape Counter; Using Dolby Noise Reduction - Pioneer CT-L11 Operating Instructions Manual

Using the Tape Deck

Setting the reverse mode

The tape deck can play both sides of a tape without you
having to take the cassette out and turning it over by
hand.
The reverse mode tells the deck what to do when it
reaches the end of the tape on the side it's playing. There
are three modes: endless, reverse and one-way.
1 Press SYSTEM MENU (MENU) and select
the TAPE MENU.
• DVD model: Use the 2 and 3 buttons to change
the currently displayed option; press
it.
• CD model: Use the 4 and ¢ buttons to
change the currently displayed option; press
select it.
2 Select REVERSE MODE from the TAPE
MENU.
3 Choose a reverse mode.
There are three reverse modes:
• – Plays the tape round and round
ENDLESS
continuously
• - – Plays one side then stops
ONE WAY
• – Stops after the end of the tape has been
REVERSE
reached in the reverse direction
Note: Actually, in endless mode, the deck will only
play the tape through 16 times before it stops
automatically.

Resetting the tape counter

The tape deck has a digital tape counter which resets to
zero each time you load a cassette or switch the power
off. You can reset the counter to zero at any other time
from the menu.
1 Press SYSTEM MENU and select the TAPE
MENU.
• DVD model: Use the 2 and 3 buttons to change
the currently displayed option; press
it.
• CD model: Use the 4 and ¢ buttons to
change the currently displayed option; press
select it.
2 Select COUNTER RESET from the TAPE
MENU.
The counter is reset after pressing

Using Dolby Noise Reduction

For best sound quality, tapes that are recorded with
Dolby NR should be played with Dolby NR switched on.
This includes virtually all commercially produced
tapes—look for the double–D symbol (2) on the
inlay card, or on the cassette tape itself.
1 Press SYSTEM MENU and select the TAPE
to select
ENTER
MENU.
• DVD model: Use the 2 and 3 buttons to change
to
SET
• CD model: Use the 4 and ¢ buttons to
2 Select DOLBY NR from the TAPE MENU.
3 Switch Dolby NR on or off as required.
The dolby indicator on the display lights when Dolby NR
is on.
• Manufactured under license from Dolby Laboratories.
to select
ENTER
to
SET
the currently displayed option; press
it.
change the currently displayed option; press
select it.
"Dolby" and the double-D symbol are trademarks of
Dolby Laboratories.
3
( ).
ENTER SET
to select
ENTER
to
SET
En
7