Installation Instructions; Tools Needed; Parts Supplied; Location Requirements - Haier HLP24E User Manual

INSTALLATION INSTRUCTIONS

TOOLS NEEDED

Pliers
Wrench
Flat-blade Screwdriver

PARTS SUPPLIED

Drain Hose Clamp
Drain Hose Hook
Drain Hose

LOCATION REQUIREMENTS

A suitable location is protected from direct sunlight and heat sources such as
radiators, baseboard heaters, or cooking appliances.
Do not install on carpeting.
The location must have a grounded electrical outlet located within 4 ft. (1.2 m) of
power cord on the back of the washer.
Hot and cold water faucets must be present within 3 ft. (0.9 m) of the hot and
cold connections on the washer.
A water heater must supply hot water with a temperature of at least 120°F
(49°C).
The water pressure should be between 20 and 100 psi (138 and 690 kPa).
Do not install or operate the washer where it will be exposed to
temperatures below 32°F (0°C). Water remaining in the washer will
freeze and cause damage to the washer.
Measuring Tape
Carpenter's Level
Water Hoses (1)
User Manual
WARNING
5