Timer Reservation - Hitachi RA-08HDF Operation And Installation Manual

TIMER RESERVATION

I ON Timer and OFF Timer are available.
OFF Timer Reservation
1
OFF TIME setting
Select the OFF TIME by pressing the
G
(OFF) button.
G Setting time will change according to the below
sequence when you press the button.
0.5 hour interval
G The value change more quickly if you keep pressing
the button.
2
Press the
OFF TIMER reserved with a signal received
G
sound "beep".
The
G
blinking.
ON Timer Reservation
1
ON TIME setting
Select the ON TIME by pressing the
G
button.
At the beginning of setting, time 6 hours was set.
G
Setting time will change according to the below
G
sequence.
0.5 hour interval
G The value change more quickly if you keep pressing
the button.
2
Press the
ON TIMER reserved with a signal received
G
sound "beep".
The (ON) Mark starts lighting instead of blinking.
G
CANCELLATION of Timer Reservation
1
Press the
As the time settings are stored in remote controller
G
memory, you only have to press the
button in order to use the same setting next time.
RA-08HDF/JDF_EN(OI)
1 hour interval
(Reserve) button
(OFF) Mark starts lighting instead of
1 hour interval
(Reserve) button
(Cancel) button
9
I Operation stop at setting time
I Operation will start for setting
temperature at setting time (The starting
time may different depend on the room
(ON)
temperature and set temperature).
(Reserve)
– 9 –
13/01/2004, 04:06 pm