How To Use; Automatic Operation - Hitachi RA-08HDF Operation And Installation Manual

I You can slightly adjust the room temperature.
I CONDITION OF AUTOMATIC OPERATION
The selected mode of operation will not change during the operation even though the room
G
temperature change.
Initial room temperature
(approx.)
Over 27°C
16 ~ 27°C
RA-08HDF/JDF_EN(OI)

HOW TO USE

AUTOMATIC OPERATION

I The device will automatically determine the operation mode either COOL or
DEHUMIDIFY depending on the initial room temperature.
1
Press the
Operation start with a "beep".
G
Press the
STOP
Please make sure you have selected the
G
by using the
The starting operation will occur an abnormal sound (turbo
G
sound) which doesn't affect the operation.
G The fan speed selector does not work at this operation.
1
Press the
G Temperature setting change by 1°C for each 1 time press.
You can raise or lower the temperature setting by a maximum of
G
3°C.
The display does not indicate the preset temperature in the
G
Automatic mode. Device will receive the setting by a "beep".
Function
COOL
DEHUMIDIFY
5
(START/STOP) button
(FUNCTION) button.
(ROOM TEMPERATURE) button
2 Up
2 Down
Temperature setting
27°C
Slightly lower than the
room temperature
– 5 –
13/01/2004, 04:06 pm
(START/STOP) button
(Automatic) mode
FAN SPEED
HIGH at start, LOW after
the preset temperature is
reached
QUIET