Advertisement
1. Printer Settings
1. Printer Settings
IMPORTANT!
All setting items and the selection of their actual settings are accomplished in this machine based on a maximum 3-digit entry system.
Refer to "1-2 List of settings" on page 1-3 for information regarding the various items as well as their corresponding menu numbers and
available settings.
1-1 Procedure for making settings
Press the Printer key. The machine will switch to the printer mode and "P00" will
1
appear in the copy quality/magnification display.
Use the "(+)" and "(-)" keys to scroll through the menu numbers one number at a
2
time. (Any menu number that does not have a corresponding setting item will be
skipped and the next viable menu number that DOES have an available setting will
be displayed.)
Select the desired setting.
3
Note
Settings are normally changed by using the "(+)" and "(-)" keys to select a value, or
by typing in the desired value directly. Press the Enter key when you are finished in
order to register the selected setting.
When typing in a network address, press the Enter key after each block of 3 digits.
<Inch version>
Press the Printer key again to switch back to the copier mode.
4
<Metric version>
1-1
Advertisement
