System Setup; Host Info - IQ CCTV IQR4D User Manual

IQCCTV

4.10 System setup

Click 'Setup' > 'Setting' to enter the Setting screen, as shown below:
A. INTERNET: setting the code stream; the higher the code stream is, the clearer the
remote image will be, but the network bandwidth must be high, otherwise the
image may have a delay.
B. FILE SAVE PATH: setting the record saving directory during remote recording and
remote backup
C. IE PASSWORD: setting the IE login password (Note: This password may be cleared in
the main menu of the DVR).

4.11 Host info

Click 'DVR HOST' to enter the Host Info screen, as shown below. View the operating state of
the hard drive, the time remaining and the software version and MAC address of this system.
IQR4D – 4 Camera DVR