Backup - IQ CCTV IQR4D User Manual

IQCCTV

When you have selected a certain record file from the record list (i.e. by moving the
cursor up and down) press 'Enter' to access the playback screen.

If 'Record Time Superimposition' has already been enabled in the 'Basic Setup' screen,
the playback screen will display the clock of recording; if 'Record Time Superimposition'
is set as 'Off' in the 'Basic Setup' screen, there will be no clock display on the playback
screen;

During record playback; press 'Slow' for slow play, press 'Fast Forward' for fast forward,
'Fast Backward' for backward play, or press 'Pause/Frame' for pause or frame-by-frame
play, press 'Exit' to exit from the playback screen and return to the previous.

3.4 Backup

Enter the 'File List' (see 3.3 Video Search) screen for the backup operation. The recorded file
may be backed up by a USB storage device. Before the record file is backed up, the user must
insert the peripheral storage device into the USB2.0 slot of this unit. This product supports the
plug-and-play operation of USB devices.
Move the cursor up and down in the Detailed File List screen to select a certain record file.
After 'Enter' is pressed in the 'Backup' check box, a '√' will appear in this box, indicating that
this recorded file has been selected. Move the cursor to the option box on the right and click
'Backup', and the screen will display the backup progress of the file, as shown below:
Notes:
When the available space of the backup device is less than the capacity of the recorded file,
the system will prompt the user with 'Not Enough Space'. After the recorded file has been
backed up, unplug the backup device directly;
See Chapter 4 'DVR Network' for network backup.
IQR4D – 4 Camera DVR