Canon ZR-800 Instruction Manual page 47

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - . •••• Trouble?
TI'OIJ~It!~h()()til1g
If you have a problem with your camcorder, refer to this checklist. Consult your dealer
or a Canon Service Center if the problem persists.
Power Source
Problem Solution
CO
• Camcorder will not turn on.
Battery pack is exhausted. Replace or charge the battery pack. 15
• The camcorder switches off
by itself.
• The cassette compartment
Attach the battery pack correctly.
cover will not open.
• The cassette compartment
stopped half way while
inserting/removing a tape.
Use the compact power adapter.
• The LCD/viewfinder switches
on and off.
Battery pack will not charge. Charge the battery pack in temperatures between 0 °C and
-
40°C (32 of and 104 OF).
Battery packs become hot with use and may not charge. When
-
the battery pack is outside the charging temperature range, the
CHG (charge) indicator will flash irregularly. The charging will
start once the battery pack temperature is below 40°C (104 OF).
The battery pack is damaged. Use a different battery pack.
-
If you connect a faulty power adapter or battery pack, the
CHARGE indicator flashes approx. twice per second and the
charging stops.
Check that the compact power adapter is correctly connected to
the camcorder.
Recording/Playback
Problem
Solution
CO
Buttons will not work. Turn on the camcorder.
-
Load a cassette. 17
Abnormal characters appear on Disconnect the power source and reconnect it after a short time.
-
the screen. The camcorder If the problem still persists, disconnect all power sources
does not operate properly.
(including the battery pack and the backup battery). This will
reset all the camcorder's settings.
"~"
flashes on the screen. Load a cassette. 17
"G:J" flashes on the screen. Battery pack is exhausted. Replace or charge the battery pack. 15
" [j] " flashes on the screen. Condensation is detected. See reference page. 54
"REMOVE THE CASSETTE" Remove the cassette and reinsert it. 17
appears on the screen.
Video noise appears on screen. When using the camcorder in a room where a plasma TV is
-
located, keep a distance between the camcorder and the
plasma TV.
•
»
0.
0.
~
o
::1
Q)
::1
0'
...
3
Q)
.... _.
o
::1